This bracket will enable the operator to preset the camera tilt angle.
You will be able to adjust it up or down to about a 30-degree angle (see photo). There is an additional bracket (Iris rod) that mounts on the side of the body to mount a motor. The top plate will have an adjustment from side to side of 3" inches. The top plate has meshed 3/8"-16 and 1/4"-20 tapped holes for your sled dovetail. It also can be turned around (cantilevered for side to side) and cantilevered fore and aft.
Small in size to reduce weight, but sturdy to add support to the dovetails.
Kit contains: bracket, iris rod mount,allen tool, and net pouch
New Price: $575.00 Sell price $450
contact Steve: firstname.lastname@example.org