Jump to content



Photo

screws for PRO lens motor rods?


  • Please log in to reply
5 replies to this topic

#1 Jerry Franck

Jerry Franck

    Advanced Member

  • Sustaining Members
  • 123 posts
  • Los Angeles, CA

Posted 17 April 2009 - 02:48 PM

Hi,

I wanted to know if any of you knew where to get the tiny screws that fixes the PRO servo motor rods onto their dovetails?

and what their diameter sizes are?


Thanks,

Jerry
  • 0

#2 Erwin Landau

Erwin Landau

    Advanced Member

  • Moderators
  • PipPipPip
  • 1699 posts
  • TBD

Posted 17 April 2009 - 04:53 PM

I would call PRO: 818-982-3991

And I'm sure you can pick up a couple and I doubt they would charge you for them.


But FYI:

Socket Head Cap Screw: 6/32 x 3/8
  • 0

#3 Jerry Franck

Jerry Franck

    Advanced Member

  • Sustaining Members
  • 123 posts
  • Los Angeles, CA

Posted 19 April 2009 - 02:17 PM

I would call PRO: 818-982-3991

And I'm sure you can pick up a couple and I doubt they would charge you for them.


But FYI:

Socket Head Cap Screw: 6/32 x 3/8



Yes, I will give them a call...
Thanks Erwin, always helpfull!!

Jerry
  • 0

#4 RonBaldwin

RonBaldwin

    Advanced Member

  • Sustaining Members
  • 2351 posts
  • Los Angeles

Posted 19 April 2009 - 07:46 PM

you could also re-tap them to metric so they'd be more readily available.
  • 0

#5 Jess Haas SOC

Jess Haas SOC

    Advanced Member

  • Sustaining Members
  • 1145 posts
  • Culver City, CA

Posted 19 April 2009 - 09:06 PM

you could also re-tap them to metric so they'd be more readily available.

But the metric system is surely on its way out as everyone is going to adopt the far more logical imperial system. Why would someone want to switch to something that won't exist much longer?
  • 0

#6 Jerry Franck

Jerry Franck

    Advanced Member

  • Sustaining Members
  • 123 posts
  • Los Angeles, CA

Posted 29 April 2009 - 12:37 PM

you could also re-tap them to metric so they'd be more readily available.

But the metric system is surely on its way out as everyone is going to adopt the far more logical imperial system. Why would someone want to switch to something that won't exist much longer?



just fyi: i bought a couple of the screw at franklins hardware in woodland hills, ca. for a buck.
they had the exact size...

jerry.
  • 0




PLC - Bartech

rebotnix Technologies

GPI Pro Systems

Boland Communications

PLC Electronics Solutions

Betz Tools for Stabilizers

Engineered Cinema Solutions

SkyDreams

Varizoom Follow Focus

Ritter Battery

IDX

Omnishot Systems

Wireless Video Systems

Media Blackout - Custom Cables and AKS

BOXX

Teradek

Paralinx LLC