Jump to content



Photo

Flyer F-Bracket


  • Please log in to reply
3 replies to this topic

#1 Jason Gorman

Jason Gorman

    Member

  • Members
  • PipPip
  • 27 posts

Posted 16 April 2009 - 06:38 PM

I just received my F-Bracket from Tiffen (using a Flyer) and if I am not mistaken it appears the bracket was assembled incorrectly, the hole for the arm and post for the gimbal are on opposite sides, is this correct or incorrect? If so is it an easy fix as I need it for Saturday!

Thanks
Jason
  • 0

#2 Richard James Lewis

Richard James Lewis

    Advanced Member

  • Members
  • PipPipPip
  • 397 posts
  • London, UK

Posted 16 April 2009 - 07:01 PM

http://photos.mikkow...m/F-Bracket.jpg

Should look like this. The hole is where the pinky is.

If not, undo the two grub screws, pull out the pin, slide it in the other way, tighten...done.

Rick.

Photo by Mikko Wilson.


I just received my F-Bracket from Tiffen (using a Flyer) and if I am not mistaken it appears the bracket was assembled incorrectly, the hole for the arm and post for the gimbal are on opposite sides, is this correct or incorrect? If so is it an easy fix as I need it for Saturday!

Thanks
Jason


  • 0

#3 Jason Gorman

Jason Gorman

    Member

  • Members
  • PipPip
  • 27 posts

Posted 16 April 2009 - 07:09 PM

Thanks Rick that's what I thought
  • 0

#4 Jason Gorman

Jason Gorman

    Member

  • Members
  • PipPip
  • 27 posts

Posted 16 April 2009 - 07:13 PM

Does the pin need to stay at about 45' angle to the nuts?


Thanks
Jason
  • 0




Engineered Cinema Solutions

Betz Tools for Stabilizers

The Moses Pole - Steadicam Monopod

PLC Electronics Solutions

Omnishot Systems

Paralinx LLC

Ritter Battery

Wireless Video Systems

Varizoom Follow Focus

PLC - Bartech

Boland Communications

rebotnix Technologies

BOXX

GPI Pro Systems

Media Blackout - Custom Cables and AKS