Jump to content



Photo

15 mm Rod Mount Monitor bracket


  • Please log in to reply
7 replies to this topic

#1 Rob Vuona SOC

Rob Vuona SOC

    Advanced Member

  • Sustaining Members
  • 1143 posts
  • Los Angeles

Posted 16 January 2009 - 07:25 PM

Hey Guys,
Looking for a 15 mm Rod Mount for my 3.5" return monitor that will go just below my existing 7" monitor. Before I start machining I was hoping there is already something existing.

The one in the picture is what is holding my current 7" monitor I would love to find another one of these, but apparently they are hard to find.

Hook a brother up with some cool options please ????!

Thanks

Attached Files


  • 0

#2 Erik Brul

Erik Brul

    Advanced Member

  • Sustaining Members
  • 444 posts
  • Almere, The Netherlands

Posted 17 January 2009 - 06:38 AM

Hey Rob,

Maybe a alternative, don´t know about quality / price .. :

http://cgi.ebay.com/...-AL...:1|294:50

Best, Erik
  • 0

#3 Rob Vuona SOC

Rob Vuona SOC

    Advanced Member

  • Sustaining Members
  • 1143 posts
  • Los Angeles

Posted 17 January 2009 - 01:26 PM

Hey Rob,

Maybe a alternative, don´t know about quality / price .. :

http://cgi.ebay.com/...-AL...:1|294:50

Best, Erik

Thanks Erick,
But I don't need the whole monitor arm just a connector to slide my return monitor onto my rods

I'm hoping Zacuto comes up with something?
  • 0

#4 Jordan Hristov

Jordan Hristov

    Member

  • Members
  • PipPip
  • 26 posts
  • Los Angeles CA, Las Vegas, NV USA

Posted 17 January 2009 - 04:58 PM

How about something like this!
Maybe you can add a small ballhead mount.

Hope that helps.

Jordan

Attached Files


  • 0

#5 Rob Vuona SOC

Rob Vuona SOC

    Advanced Member

  • Sustaining Members
  • 1143 posts
  • Los Angeles

Posted 17 January 2009 - 07:02 PM

How about something like this!
Maybe you can add a small ballhead mount.

Hope that helps.

Jordan

Thanks Jordan,
you would think it would be that easy right, but unfortunately a little ballhead mount would make the second monitor stick up too much and get in the way of my 7". aargh . . .

Thanks for trying

But where did you get that one
  • 0

#6 Jordan Hristov

Jordan Hristov

    Member

  • Members
  • PipPip
  • 26 posts
  • Los Angeles CA, Las Vegas, NV USA

Posted 18 January 2009 - 02:04 PM

Rob,

I had a machinist build them for me. I needed some quick brackets for a job.
He may have few extra lying around from the same batch.

Let me know if you are interested.

Thank you.

Best.
  • 0

#7 max volokh

max volokh

    Advanced Member

  • Members
  • PipPipPip
  • 52 posts
  • st. petersburg, russia

Posted 18 January 2009 - 04:55 PM

probably at this place http://actionproducts.ch/ 8-)
I like there equipment
  • 0

#8 Kris Torch Wilson

Kris Torch Wilson

    Advanced Member

  • Sustaining Members
  • 184 posts
  • Los Angeles

Posted 23 January 2009 - 03:46 PM

Rob,

Did you check with Tiffen. I bought one for my pgm monitor.
  • 0




GPI Pro Systems

Varizoom Follow Focus

BOXX

Paralinx LLC

Engineered Cinema Solutions

PLC - Bartech

IDX

Media Blackout - Custom Cables and AKS

Wireless Video Systems

rebotnix Technologies

Omnishot Systems

Betz Tools for Stabilizers

Ritter Battery

SkyDreams

Teradek

Boland Communications

PLC Electronics Solutions