Help! Lemo designation needed
Posted 22 September 2008 - 07:55 AM
Anyone know the exact designation of the 3-pin power Lemo on the Archer stage.
I need to know in one hour from now!
Posted 22 September 2008 - 08:20 AM
Pin 1: Ground
Pin 2: + 13.2 VDC
Pin 3: + Battery (28.8 VDC)
PIN 1 PWR GND See Note 4
PIN 2 +12V BATTERY See Note 1
PIN 3 +24V BATTERY See Note 2
Note 1: 12V BATTERY VOLTAGE is sourced directly from battery voltage in 12V mode.
12V BATTERY VOLTAGE is sourced directly from DC-DC converter in 24V mode. (14.4 to 14.6Vdc at 100W max.)
Note 2: 24V BATTERY VOLTAGE is sourced directly from two sled batteries connected in series.
Note 4: POWER GND and VIDEO GND can be connected by internally jumpering JP2-1 to JP2-2 on 800-0005 board.
Posted 22 September 2008 - 08:37 AM
Just realized that the Archer is 12V system only, right?!?
One would Assume they kept it similar for the Archer!?!
If so, test the connector you should find that the Pin 3 is inoperative.
Posted 22 September 2008 - 11:31 AM
The matching plug designation for the power output of the Archer stage is: FGG.OB.303.CLAD52
All the best,