Jump to content



Photo

Does Modulus 2000 work with 24 volt power?


  • Please log in to reply
3 replies to this topic

#1 Jess Haas SOC

Jess Haas SOC

    Advanced Member

  • Sustaining Members
  • 1145 posts
  • Culver City, CA

Posted 06 September 2008 - 02:21 PM

Does Modulus 2000 work with 24 volt power? If so does it use the same pins or different ones?

~Jess
  • 0

#2 Jerry Holway

Jerry Holway

    Advanced Member

  • Sustaining Members
  • 748 posts
  • Philadelphia

Posted 06 September 2008 - 04:43 PM

Jess,

You must get/make a 12 volt power supply... with a decent amp capacity, like 3amps, and a heat sink.

It's not too hard....

Parts from Digikey or Newark or others.... real pain is the HRS (Hirose) connectors.

Not sure it's worth it, but years ago I made some (long gone, blown up, or lost...)

Jerry
  • 0

#3 Chris Murphy

Chris Murphy

    New Member

  • Members
  • Pip
  • 9 posts

Posted 27 October 2008 - 09:24 PM

Call Peter Spinelli at CIT East -- some units are able to be modified for 24V. But at the cost you may as well upgrade to Modulus 3000 or Dynawave eVTX100.

Chris
  • 0

#4 Eric Fletcher S.O.C.

Eric Fletcher S.O.C.

    Advanced Member

  • Sustaining Members
  • 2922 posts
  • LA, Ca

Posted 28 October 2008 - 12:10 AM

Call Peter Spinelli at CIT East -- some units are able to be modified for 24V. But at the cost you may as well upgrade to Modulus 3000 or Dynawave eVTX100.

Chris



Got 10 weeks to wait for Peter to get to you?

It's just not worth the hassle dealing with him
  • 0




Ritter Battery

Varizoom Follow Focus

PLC - Bartech

Media Blackout - Custom Cables and AKS

rebotnix Technologies

BOXX

Omnishot Systems

The Moses Pole - Steadicam Monopod

Wireless Video Systems

Engineered Cinema Solutions

Betz Tools for Stabilizers

Boland Communications

PLC Electronics Solutions

Paralinx LLC

GPI Pro Systems