Jump to content



Photo

PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket


  • Please log in to reply
4 replies to this topic

#1 Stuart Howell

Stuart Howell

    New Member

  • Sustaining Members
  • 5 posts
  • London (UK)

Posted 18 April 2008 - 03:57 PM

PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket
4 Piece Carbon Fibre 2" Post/Gimbal/Monitor Bracket

Comprises:

? 2" 4 stage carbon fibre post 21" - 72" (built in super-post)
? MK-V V2" Advanced Gimbal
? MK-V V2" telescopic monitor arm in PRO mount
? PRO Junction Box
? Jerry Hill 'Gorelock II' docking bracket with 2 docking rings.

Designed to totally replace the PRO post system from the donkey box/topstage down to the lower J-Box, or be used as a basis for a new sled (add topstage, monitor and battery base).

It can be swapped over for the PRO post in minutes and on set, or as a permanent replacement : remove the 4 screws on the base of the post system and the 4 screws that hold the topstage, then swap the post system over, re plug the new cable and re-bolt.

Slightly longer than PRO post fully collapsed (about 1").

Selling with Gorelock II docking bracket and two rings.

Just add donkey box, monitor and battery base for a complete rig. (Compatible with any PRO or MK-V components)

Extremely good condition and used only occasionally as back-up / additional rig ! Whatever your thoughts about MK-V, this does work very well !

Post assembly new from MK-V is over $14,000 / ?8900 / £7000

Asking $9000 / ?6000 / £4500 + shipping.

I also have a mint condition PRO Donkey Box II available for $2500/?1575/£1250

PRO Vest/Harness (very good condition) also available for $3000/?3800/£1500

If anyone wants everything, I'll throw in the original PRO / Anvil vest flight case for shipping.

Please email if you need any more pics or information.

Located London (UK) but can ship anywhere.

Stuart Howell
Camera/Steadicam Operator
mail: stuhow at mac.com

Attached Files


  • 0

#2 John Ford

John Ford

    New Member

  • Sustaining Members
  • 8 posts
  • Chicago area

Posted 18 April 2008 - 09:38 PM

Will the Pro Donkey Box II fit a 1 1/2" post?

Thanks. John




PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket
4 Piece Carbon Fibre 2" Post/Gimbal/Monitor Bracket

Comprises:

? 2" 4 stage carbon fibre post 21" - 72" (built in super-post)
? MK-V V2" Advanced Gimbal
? MK-V V2" telescopic monitor arm in PRO mount
? PRO Junction Box
? Jerry Hill 'Gorelock II' docking bracket with 2 docking rings.

Designed to totally replace the PRO post system from the donkey box/topstage down to the lower J-Box, or be used as a basis for a new sled (add topstage, monitor and battery base).

It can be swapped over for the PRO post in minutes and on set, or as a permanent replacement : remove the 4 screws on the base of the post system and the 4 screws that hold the topstage, then swap the post system over, re plug the new cable and re-bolt.

Slightly longer than PRO post fully collapsed (about 1").

Selling with Gorelock II docking bracket and two rings.

Just add donkey box, monitor and battery base for a complete rig. (Compatible with any PRO or MK-V components)

Extremely good condition and used only occasionally as back-up / additional rig ! Whatever your thoughts about MK-V, this does work very well !

Post assembly new from MK-V is over $14,000 / ?8900 / £7000

Asking $9000 / ?6000 / £4500 + shipping.

I also have a mint condition PRO Donkey Box II available for $2500/?1575/£1250

PRO Vest/Harness (very good condition) also available for $3000/?3800/£1500

If anyone wants everything, I'll throw in the original PRO / Anvil vest flight case for shipping.

Please email if you need any more pics or information.

Located London (UK) but can ship anywhere.

Stuart Howell
Camera/Steadicam Operator
mail: stuhow at mac.com


  • 0

#3 Eric Fletcher S.O.C.

Eric Fletcher S.O.C.

    Advanced Member

  • Sustaining Members
  • 2922 posts
  • LA, Ca

Posted 19 April 2008 - 01:36 AM

Will the Pro Donkey Box II fit a 1 1/2" post?



Yes it will
  • 0

#4 Alec Jarnagin SOC

Alec Jarnagin SOC

    Advanced Member

  • Moderators
  • PipPipPip
  • 1800 posts
  • New York City, USA

Posted 19 April 2008 - 10:33 PM

If you need a battery base for this set up, I'm selling a Jerry-Rig battery base.

http://www.steadicam...x...ost&p=35205

Thanks
  • 0

#5 Stuart Howell

Stuart Howell

    New Member

  • Sustaining Members
  • 5 posts
  • London (UK)

Posted 20 April 2008 - 01:14 PM

Hi John,

Yes, as Eric said, just attaches using 4 screws straight into the PRO J-box or similar. Post size doesn't make any difference.

Stuart
  • 0




Boland Communications

Engineered Cinema Solutions

rebotnix Technologies

SkyDreams

GPI Pro Systems

PLC Electronics Solutions

BOXX

Teradek

Ritter Battery

IDX

Betz Tools for Stabilizers

Varizoom Follow Focus

Wireless Video Systems

Omnishot Systems

Media Blackout - Custom Cables and AKS

PLC - Bartech

Paralinx LLC