Jump to content



Photo

clean the arm master


  • Please log in to reply
3 replies to this topic

#1 luis castro

luis castro

    Advanced Member

  • Sustaining Members
  • 245 posts
  • Spain

Posted 04 April 2008 - 11:58 PM


Today I disarmed my master series arm. Firstable you have to get the maximun adjustment position after this remove the screw, we must be careful with spring pre-pressed then we are ready to disarm. To assemble the arm you need a handle to press the spring, if you want to reduce the minimum of the arm you must not tighten completly the screw.

  • 0

#2 Martin Stacey

Martin Stacey

    Advanced Member

  • Sustaining Members
  • 201 posts
  • Adrenochrome, New Zealand

Posted 05 April 2008 - 01:17 AM

LOL ... so this is what happens when you put something through an internet language translator.... gibberish.

Maybe someone who can figure out what you're asking will reply.
  • 0

#3 luis castro

luis castro

    Advanced Member

  • Sustaining Members
  • 245 posts
  • Spain

Posted 05 April 2008 - 08:01 AM

LOL ... so this is what happens when you put something through an internet language translator.... gibberish.

Maybe someone who can figure out what you're asking will reply.



Mr Martin my post is not a question is an information. thank for your time
  • 0

#4 JamieSilverstein

JamieSilverstein

    Advanced Member

  • Sustaining Members
  • 361 posts
  • New York City

Posted 09 April 2008 - 04:14 AM

Luis;
For all of us Master arm owners, it might be useful to take pictures as illustrations of what you are describing......... It's worth a thousand words (or so they say).
Jamie
  • 0




BOXX

rebotnix Technologies

Varizoom Follow Focus

GPI Pro Systems

Betz Tools for Stabilizers

Ritter Battery

Wireless Video Systems

Media Blackout - Custom Cables and AKS

Boland Communications

Omnishot Systems

The Moses Pole - Steadicam Monopod

Engineered Cinema Solutions

PLC Electronics Solutions

Paralinx LLC

PLC - Bartech