Jump to content


GPI 10 Amp Breakers

  • Please log in to reply
No replies to this topic

#1 Iain Baird

Iain Baird

    Advanced Member

  • Sustaining Members
  • 272 posts
  • Toronto

Posted 16 December 2007 - 09:08 PM

Based on previous conversations about amperage, cable gauge and different lemo plug amp capacities I have a new query.

With my GPI II battery system if a thicker gauge post cable were to be used (16 AWG for power) and a larger lemo plug for both Upper junction (3B 308, 13 amp capacity) and Camera power out of Upper Junction box 2S.303 (15 amp capacity) would this scenario then only lead to the 10 Amp Breakers on the Sled popping any time the draw from the camera was too much?

Edited by Iain Baird, 16 December 2007 - 09:15 PM.

  • 0

Wireless Video Systems

rebotnix Technologies


PLC - Bartech

Omnishot Systems

Varizoom Follow Focus

Engineered Cinema Solutions

GPI Pro Systems

Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

The Moses Pole - Steadicam Monopod

Ritter Battery

Betz Tools for Stabilizers

Paralinx LLC

Boland Communications