power cable pin outs
Posted 07 September 2007 - 03:52 AM
I need to know what the pin outs are for a 24V power cable from a Panavision block battery (this is the side I need) to a Ken-Labs 24V gyro inverter. I'm looking for info on the 3 pin XLR side. Next, I need the pin outs for a 12V power cable from an Arriflex 12V block battery (again, this is the side I need) to a Ken-Labs 12V gyro inverter. I need the 4 pin XLR side.
Thanks in advance for any help. I really appreciate it.
Posted 07 September 2007 - 10:30 AM
3pin XLR on Panavision 24volt batteries:
Pin 1 = +24 volts
Pin 2 = GND
Standard 4pin "XLR" for 12volt Arriflex (and others) batteries:
Pin 1 = GND
Pin 4 = +12 volts
Hope this helps,
Posted 07 September 2007 - 02:10 PM