Jump to content


Archos AV500 + XTR = No video detected

  • Please log in to reply
1 reply to this topic

#1 Bryan Fowler

Bryan Fowler

    Advanced Member

  • Sustaining Members
  • 370 posts
  • Chattanooga, TN

Posted 17 August 2007 - 08:17 PM

I was on a shoot last week. I was attempting to use my AV500 to record video assist, and ran into problems.

I'll explain my setup.

BNC from the tap to the RCA to minijack pigtail cable (on the yellow RCA)
minijack pigtail to the AV in on the AV500 Dock
Dock was plugged into the wall
Dock was plugged into the av500

I'd go to record, and it said no video signal detected.

Now, I tested this at home the night before, and all was well.

Any ideas to what I was missing?

  • 0

#2 nick franco

nick franco

    Advanced Member

  • Sustaining Members
  • 256 posts
  • San Fernando, CA

Posted 18 August 2007 - 12:32 AM

Was it a black and white tap? They get mad if you don't set it the proper input type. The auto setting does not always pick the right type.
  • 0

Paralinx LLC


Camera Motion Research


PLC Electronics Solutions

rebotnix Technologies

Ritter Battery

Boland Communications

Wireless Video Systems

Omnishot Systems


Betz Tools for Stabilizers

PLC - Bartech

Varizoom Follow Focus

GPI Pro Systems