Jump to content



Photo

Connector for Arri power?


  • Please log in to reply
7 replies to this topic

#1 Peter Milanov

Peter Milanov

    Advanced Member

  • Sustaining Members
  • 90 posts
  • Sweden

Posted 02 August 2007 - 08:56 AM

Does anybody know the Fischer connector number that Arri use for their 24V power?

I believe it is one of these two: 105 A051 or 105 A087
  • 0

#2 Afton Grant

Afton Grant

    Advanced Member

  • Moderators
  • PipPipPip
  • 908 posts
  • New York, Boston

Posted 02 August 2007 - 09:10 AM

The ones I've used are S 105 Z087-130+. I think the 405 series is plastic and can save some weight, if you're counting every ounce.
  • 0

#3 Matt Petrosky

Matt Petrosky

    Advanced Member

  • Sustaining Members
  • 190 posts
  • Los Angeles, CA

Posted 02 August 2007 - 12:13 PM

The ones I've used are S 105 Z087-130+. I think the 405 series is plastic and can save some weight, if you're counting every ounce.


Afton is correct, S 105 Z087-130+ is the part number. It's weird because it is a male in-line connector with female pins, hence the Z. Fischer makes the two pin version with two different pin sizes, the Arri connector (part number above) is the larger of the two, hence the 087 in lieu of the 051.

You will also need a collet (the metal part that clamps down on the cable to hold it firmly in the connector) such as E3 105.6/8.5. I think with Fischer the 5.6/8.5 refers to the diameter range of cable that this collet size fits, in millimeters. I know that this collet number is for a non-shielded collet. These are usually a little easier to work with then the two-peice shielded version, although a connector this big is easy anyway.

Hope this helps,
Matt
  • 0

#4 Peter Milanov

Peter Milanov

    Advanced Member

  • Sustaining Members
  • 90 posts
  • Sweden

Posted 02 August 2007 - 12:14 PM

Thank you Afton!
  • 0

#5 Peter Milanov

Peter Milanov

    Advanced Member

  • Sustaining Members
  • 90 posts
  • Sweden

Posted 02 August 2007 - 12:16 PM

...and Matt.
  • 0

#6 Matt Petrosky

Matt Petrosky

    Advanced Member

  • Sustaining Members
  • 190 posts
  • Los Angeles, CA

Posted 02 August 2007 - 12:19 PM

Oh, and someone, I think Fred Davis, gave me SI405 Z087 C3J2R as the part number for the lightweight version in a Teflon casing. I have a couple of these and they are great, really light and still rugged, a little bit longer then their brass/metal counterparts though.

-Matt
  • 0

#7 william west

william west

    Member

  • Sustaining Members
  • 15 posts

Posted 02 August 2007 - 03:44 PM

Does anybody know the Fischer connector number that Arri use for their 24V power?

I believe it is one of these two: 105 A051 or 105 A087



I have just bought one of these (the 2 pin fischer power for 435/ sr3/535)
It is a 2 pin Fischer 105 series, and there are 2 parts to it, the plug is part no 05-0661-0 and the clamp set is part no 05-13839-0

I paid around $170 us after shipping etc... Hope you can find one cheaper!

henry
  • 0

#8 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1656 posts
  • Los Angeles, CA

Posted 18 December 2011 - 08:24 PM

Does anybody know the part # for the right angle Fischer Plug version for the Alexa/Camwave issue....
  • 0




IDX

Wireless Video Systems

BOXX

SkyDreams

Betz Tools for Stabilizers

Boland Communications

Ritter Battery

rebotnix Technologies

Paralinx LLC

GPI Pro Systems

Teradek

PLC - Bartech

Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

Engineered Cinema Solutions

Omnishot Systems

Varizoom Follow Focus