Jump to content


3A complete package for sale

  • Please log in to reply
No replies to this topic

#1 Pieter Stathis

Pieter Stathis


  • Sustaining Members
  • 24 posts
  • Vancouver, Canada

Posted 14 June 2007 - 08:08 PM


This rig started my steadicam operating career and has been bullet proof around the world -- hot, sandy, cold, rainy climates and locations from water work to car/ATV work and every shot in between. The entire package has been very well maintained and serviced (never day-hired) for 5 years and has been thoroughly fleshed out with all possible accessories such as cables, brackets and custom cases. Whoever buys this package is ready to go out and shoot the very same day ? absolutely EVERYTHING you need to get started -- including single channel remote focus system!

Cinema Products Steadicam IIIA Sled (Serial No. 195)
(includes newly-serviced monitor, telescoping post, 12V/24V Hable power conversion)
Sled and monitor rain covers
Monitor sun hood
2 x long and short wrap grips
Cinema Products Steadicam technical/operating manual
Pelican 1650 Hard case for Sled

Cinema Products Steadicam IIIA Arm (with Gold Springs) (Serial No. 447)
2 x Steadicam Arm rain covers
Seddon custom carry case for Steadicam Arm
Cinema Products Steadicam IIIA Universal Vest (Serial No. 459)
Seddon custom carry case for Universal Vest

7 x 14V CP Steadicam Batteries (Serial Nos. 932404, 932405, 932412, 932413, 921013, 853701, 853703)
2 x PAG High Speed Chargers (Serial Nos. 27410, 28471)
2 x PAG High Speed Charger power cables
Seddon custom carry case for Steadicam Batteries and PAG High Speed Chargers

Mathews triple riser Docking Stand
CP docking collar & docking bracket
4 x T-handle allan keys
2 x camera mounting plates with rods
Low-Mode J-bracket
4? Arm Riser Post
6? Arm Riser Post
10? Arm Riser Post

Bartech Focus Device Transmitter handset (Serial No. T1.0467)
Bartech Focus Device Amplifier/receiver (Serial No. R1.0467)
Bartech 2-pin to steadicam power cable
Bartech custom mounting collar bracket
Hable custom 24V power/run/stop/down-conversion cable
Soft case for Bartech Focus Device

Zero Backlash Motor (Serial No. 232)
4 x extra gears for Zero Backlash Motor (including fat gear)
3 x brackets for Zero Backlash Motor
Support tube for Zero Backlash Motor
2 x 12? Zero Backlash Motor power cables
Pelican custom hard case for Zero Backlash Motor

Sony on-board playback/recorder unit
Hirose power cable for on-board power
Video transmitter with antenna and power cable
Soft case for transmitter
Multi-meter voltage tester
10 x 5A Monitor fuses, 10x 10A Monitor fuses, 10 x 2A Steadicam fuses

2 x 12V Arriflex power cables
1 x 12V Arriflex run/stop cable
2 x 24V Arriflex power cables
1 x 24V Arriflex run/stop cable
1 x 24V Moviecam power cable
1 x 24V Moviecam run/stop cable
1 x 24V Panavision Panaflex power cable
1 x 24V Panavision run/stop cable
2 x 24V Panavision XL power cables
1 x 12V Sony/Panasonic HD power cable
1 x 12V Sony/Panasonic HD run/stop cable
4 x Video BNC cables (various lengths)
4 x RCA cables (various lengths)
Panavision waterproof rain Ditty Bag for steadicam cables


Pieter Stathis
  • 0

Betz Tools for Stabilizers

GPI Pro Systems

Omnishot Systems


PLC - Bartech

rebotnix Technologies



Varizoom Follow Focus

Camera Motion Research

PLC Electronics Solutions

Boland Communications

Paralinx LLC

Wireless Video Systems

Ritter Battery