Jump to content



Photo

For EFP Experts


  • Please log in to reply
3 replies to this topic

#1 TobyBarraud

TobyBarraud

    Member

  • Members
  • PipPip
  • 17 posts

Posted 27 May 2004 - 09:52 AM

Dear Operators
I have a second hand EFP rig, and I am having trouble with the post. After dismantling the post I have found that the plastic sleeve inside is sticking, making it hard to raise or lower the sled.
I note that the plastic sleeve has two screw holes in it, as does the post, but the exterior clamp has only one hole. Is the extra hole in the post and sleeve just a back up? Could this be part of the problem?
How can I make the post easier to adjust?
Thanks so much,
Toby.
  • 0

#2 Gus Trivino

Gus Trivino

    Advanced Member

  • Sustaining Members
  • 241 posts
  • Buenos Aires, Argentina.

Posted 27 May 2004 - 03:01 PM

Hi Toby:

Do you have a digital camera?
Take a photograph of slead and put on the messagges.

Gus.
  • 0

#3 Gus Trivino

Gus Trivino

    Advanced Member

  • Sustaining Members
  • 241 posts
  • Buenos Aires, Argentina.

Posted 28 May 2004 - 12:43 PM

Hi Toby:


There are 2 holes in the plastic.
In one of them enter a screw (the upper) in the other (below) enter a pin that fix the post. Tomorrow I will send a Photograps of my sled.
Sorry for my english.
(I think that you loose a screw..) <_<

Gus from Argentina.
  • 0

#4 Gus Trivino

Gus Trivino

    Advanced Member

  • Sustaining Members
  • 241 posts
  • Buenos Aires, Argentina.

Posted 01 June 2004 - 03:37 PM

Hi Toby:

Did you recive the photograps?

Gus
  • 0




Betz Tools for Stabilizers

GPI Pro Systems

PLC Electronics Solutions

PLC - Bartech

The Moses Pole - Steadicam Monopod

Paralinx LLC

Wireless Video Systems

Media Blackout - Custom Cables and AKS

rebotnix Technologies

Engineered Cinema Solutions

Boland Communications

Varizoom Follow Focus

BOXX

Omnishot Systems

Ritter Battery