Jump to content


Full Ultra Cine Package

  • Please log in to reply
1 reply to this topic

#1 Matt Norman

Matt Norman

    New Member

  • Sustaining Members
  • 6 posts

Posted 11 June 2006 - 05:05 PM

The package is:

- Ultra Cine Sled
- Composite Center Telescoping Post 28" to 71"
- Low Friction Gimbal
- No Tools Tilt Head
- Motorized Stage V. 2.0
- Lightweight Ultra Vest with Titanium socket block
- No-tools Titanium Arm to Vest Interface
- Ultra Isoelastic arm
- No tools Arm Post Clamp
- High performance 5 inch 16:9 green screen monitor
- Frameline Generator
- On Screen Artificial Horizon indicator
- On Screen Battery Display
- Monitor Hood
- Spares kit: battery for motorized stage, 1/4-20 and 3/8-16 camera
screws, monitor spare fuse
- Internal 24V to 13.2V regulated down-converter fuse,
- Four 24V NiMH Tiffen Batteries with with mounting hardware & Built-In
- PAG rapid single battery charger with cable (24V)
- Dynamic Spin & Docking Bracket
- One Long Dovetail Plate
- One Short Dovetail Plate
- 1/4" T-Handle Allen Wrench
- Dovetail Accessory Bracket
- Owner's Manual

Cable Set
- 12V Power Cable
- 24V Power Cable (open ended)
- 24V Power Cable for Panavision
- 24V Power Cable for Arri
- 24V Power Cable for Moviecam

- Hard Case for the Sled
- Hard Case for Ultra batteries and accessories
- Hard Case for Vest & Arm

Basically, the complet package. It's a fantastic rig.

The rig has never never been dry hired and is in fantastic condition with only one careful owner/operator since new. All four of the Tiffen 24V batteries have recently been
recelled by Pag, giving a fantastic improvement on run times. The sled
underwent a service at Optex at the end 2005.

Asking price: Serious Offers

I am based in the UK and can ship anywhere. More photos available on request.

Best regards

Matt Norman

email: jumna@blueyonder.co.uk
(t/f) 0044 (0)117 9621057
(m) 0044 (0)7976 247652

Attached File  3.jpg   117.5KB   381 downloads
  • 0

#2 Alec Jarnagin SOC

Alec Jarnagin SOC

    Advanced Member

  • Moderators
  • PipPipPip
  • 1807 posts
  • New York City, USA

Posted 11 June 2006 - 05:22 PM


May I humbly suggest that you change your log-in name to your real name. We are on the cusp of making it mandatory plus I can pretty much assure you that no one will buy a rig from somebody who does not use their real name around here.

  • 0

PLC - Bartech

The Moses Pole - Steadicam Monopod

GPI Pro Systems

Engineered Cinema Solutions

Omnishot Systems

Paralinx LLC

Wireless Video Systems

Media Blackout - Custom Cables and AKS

rebotnix Technologies

Ritter Battery

Boland Communications


Betz Tools for Stabilizers

Varizoom Follow Focus

PLC Electronics Solutions