Jump to content



Photo

need help... with master series top stage


  • Please log in to reply
3 replies to this topic

#1 Hervé Colosio

Hervé Colosio

    Advanced Member

  • Sustaining Members
  • 102 posts
  • France

Posted 16 May 2006 - 11:52 AM

does someone know how to remove this button on my master series ?
a little disc that stop the top stage to go right or left have been broken .
i have now a 0.5 mm of move right and left on the top stage .
to replace this i need to remove the red button . there is a little screw in it , i have remove it , but the button still in place .

any help will be very appreciated .
  • 0

#2 Dean_Zhong

Dean_Zhong

    New Member

  • Members
  • Pip
  • 1 posts

Posted 16 May 2006 - 08:22 PM

Hello!
After u remove the little screw,you must to pull it use definite strength
  • 0

#3 Mikael Kern

Mikael Kern

    Advanced Member

  • Members
  • PipPipPip
  • 66 posts
  • Denmark

Posted 17 May 2006 - 05:32 AM

Hello!
After u remove the little screw,you must to pull it use definite strength


As I remember it there is a pin that goes through the rod. Like a safety pin. You need to find a small solid pin of the same size and tap out the safety pin. Be gentle.

Mikael Kern
  • 0

#4 Hervé Colosio

Hervé Colosio

    Advanced Member

  • Sustaining Members
  • 102 posts
  • France

Posted 17 May 2006 - 06:24 AM

thats it , thank you for your help .
it's the secured small pin who was very difficult to remove .
  • 0




IDX

BOXX

Boland Communications

Ritter Battery

PLC Electronics Solutions

PLC - Bartech

GPI Pro Systems

Omnishot Systems

Paralinx LLC

Wireless Video Systems

rebotnix Technologies

Betz Tools for Stabilizers

Varizoom Follow Focus

Teradek

SkyDreams

Media Blackout - Custom Cables and AKS

Engineered Cinema Solutions