does anyone have a step by step description or a video how to remove the gimbal from the post?
I will send my Gimbal in for a service at the end of the year, so i have to take it of.
Remove the Gimbal from a Ultra1 with a Superpost
Posted 30 April 2018 - 09:40 AM
Posted 30 April 2018 - 10:16 AM
Also, unless you need to exchange the pan bearing, you can service it on the rig.
Posted 30 April 2018 - 10:51 AM
I think i have to exchange the pan bearing, because on some point i feel a friction while paning.
Just mailed Christian about a week ago, he replied that there are no more spare parts for the Ultra1 Gimbal and that he couldn't do it. :/
So i have to remove the gimbal and send it to someone else.
Posted 30 April 2018 - 01:56 PM
Send it to Tiffen/ UK
The bearings are all in standard sizes, so some bearing should be available, somewhere.
Posted 01 May 2018 - 04:39 AM
The bearing should be available, the problem would be if the clamp mechanism is damaged.
Posted 01 May 2018 - 04:59 AM
Thank you for the reply.
The clamp mechanism works fine, i just need some new bearings for pan, tilt and roll.
I heard of the clamp mechanism problem on the master und ultra gimbal, but i checked that and mine works fine and i diddnt get any problems from there.