Jump to content


Phantom camera cables

  • Please log in to reply
2 replies to this topic

#1 Ramon Engle

Ramon Engle

    Advanced Member

  • Sustaining Members
  • 513 posts
  • Atlanta

Posted 07 April 2018 - 08:55 PM

Anyone familiar with Phantom power cables and remote on off interface cables? Not exactly sure model im using but im assuming the recent versions are similar. Maybe I shouldnt assume.

  • 0

#2 Frederic Chamberland

Frederic Chamberland

    Advanced Member

  • Sustaining Members
  • 286 posts
  • Montreal

Posted 08 April 2018 - 09:13 AM

The Flex4k has a different power connector than the new VEO series. Here's a link to my PRO/Flex4K cable. The VEO has a different power connector (you can actually use 2 different connectors on these cameras)....Also, since the VEO is so small (smaller than a Mini), you might want to use an on board battery at the back if you have a power box attached to it. 





As for on/off : if you are using Iphantom, let the phantom tech use that technology (micro router on camera linked to an ipad) .  There is a possibility to use triggers from BNC or 3 pins arri RS connector on the flex 4k.  VEO is triggered by BNC or again Iphantom thru router. Or if you have a Mini bob breaker box, you will have BNC triggers. Lots of config . Maybe too many actually.... Good luck.

  • 0

#3 Ramon Engle

Ramon Engle

    Advanced Member

  • Sustaining Members
  • 513 posts
  • Atlanta

Posted 08 April 2018 - 09:29 AM

Thanks Frederic. Great info.
  • 0

GPI Pro Systems

PLC - Bartech

Omnishot Systems

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

rebotnix Technologies

Varizoom Follow Focus

Wireless Video Systems

Ritter Battery


Boland Communications

PLC Electronics Solutions

Engineered Cinema Solutions

Paralinx LLC

The Moses Pole - Steadicam Monopod