Jump to content



Photo

g 50 arm lift knob


  • Please log in to reply
2 replies to this topic

#1 dimitris lefakis

dimitris lefakis

    New Member

  • Members
  • Pip
  • 2 posts
  • athens greece

Posted 19 March 2018 - 01:52 PM

Hello.I own g50 arm and the lift knob in the rear section(the section which is near the socket block)stoped working(locked in position).Has anybody experience the same problem?
  • 0

#2 Jerry Holway

Jerry Holway

    Advanced Member

  • Sustaining Members
  • 743 posts
  • Philadelphia

Posted 19 March 2018 - 06:02 PM

Just checking if you are attempting to adjust it while the arm is unloaded, then that definitely won't work.

 

However, if you are carrying a load and have the spring roughly at 90 degrees to the lift adjuster and it is jammed, then something bad has happened and it should go back in for repairs (alas).  Someone trying to adjust the arm when unloaded could cause such a problem.

 

Email Joe Wilbur at Tiffen. jwilbur@tiffen.com


  • 0

#3 dimitris lefakis

dimitris lefakis

    New Member

  • Members
  • Pip
  • 2 posts
  • athens greece

Posted 19 March 2018 - 06:47 PM

Hi Jerry!Never try to adjust the arm unloaded.Only the isoellastic control.Its obvious that something bad happened.I will contact Tiffen.Thanks for your time.
  • 0




PLC Electronics Solutions

Betz Tools for Stabilizers

rebotnix Technologies

PLC - Bartech

Teradek

Engineered Cinema Solutions

Ritter Battery

Varizoom Follow Focus

GPI Pro Systems

Boland Communications

Wireless Video Systems

BOXX

Omnishot Systems

Media Blackout - Custom Cables and AKS

Paralinx LLC