Jump to content



Photo

Alexa LF power

Pro GPI Alexa LF

  • Please log in to reply
2 replies to this topic

#1 Brad Smith

Brad Smith

    Advanced Member

  • Members
  • PipPipPip
  • 137 posts
  • Sydney, Australia

Posted 19 February 2018 - 05:29 AM

So has anyone had an Alexa LF on their rig yet? Looking at the specs, the Pro should come close, but I'm not sure it has enough capacity once you add in wireless FF, motors, Video TX etc.

Arri spec the LF at 120 watts.
  • 0

#2 Emiliano Leurini

Emiliano Leurini

    Member

  • Members
  • PipPip
  • 18 posts
  • rome

Posted 02 June 2018 - 03:05 AM

I didnt use the Alexa LF yet, but I just did 3 days of commercial with Alexa sxt and I couldnt power it from the the 12 volt hi cap connector( my sled is artemis cine had pro Arri) because with Preston, cinetape and teradek, there was to many ampere.
I solved the problem whit 24 volt out put from the sled.

Edited by Emiliano Leurini, 02 June 2018 - 03:06 AM.

  • 0

#3 Adi Visser SOC SASO

Adi Visser SOC SASO

    Advanced Member

  • Sustaining Members
  • 55 posts
  • Cape Town South Africa

Posted 08 November 2018 - 01:28 PM

Camera only runs off 24V apparantly it used to do 12V but they changed the firmware it draws a lot close to 150W


  • 0




rebotnix Technologies

Omnishot Systems

Wireless Video Systems

Engineered Cinema Solutions

GPI Pro Systems

The Moses Pole - Steadicam Monopod

PLC Electronics Solutions

PLC - Bartech

Ritter Battery

Media Blackout - Custom Cables and AKS

Paralinx LLC

BOXX

Varizoom Follow Focus

Betz Tools for Stabilizers

Boland Communications