Jump to content


Bearing for 3A arm?

  • Please log in to reply
1 reply to this topic

#1 Matthew Hutchens

Matthew Hutchens


  • Members
  • PipPip
  • 17 posts

Posted 03 January 2018 - 01:51 PM

I'm trying to find out what bearing are used in the verticle shaft of the 3A arm (at the elbow).  I've had some foreign particles cause some binding on one of the bearings.  I've cleaned it out but still not all the internal pins spin so I'm going to replace the bearing.  Does anyone have an idea of what bearing was used here.  There are no markings on the bearing itself.  Thanks



  • 0

#2 Jarrett P. Morgan

Jarrett P. Morgan

    Advanced Member

  • Sustaining Members
  • 229 posts
  • Los Angeles, CA

Posted 03 January 2018 - 08:44 PM

Your best bet is to try Robert Luna. 



  • 0

Varizoom Follow Focus

Media Blackout - Custom Cables and AKS

Engineered Cinema Solutions

GPI Pro Systems

The Moses Pole - Steadicam Monopod


PLC - Bartech

Omnishot Systems

rebotnix Technologies

Boland Communications

Paralinx LLC

Ritter Battery

Betz Tools for Stabilizers

PLC Electronics Solutions

Wireless Video Systems