Jump to content



Photo

PRO I & Model II Arm


  • Please log in to reply
1 reply to this topic

#1 AndreasWood

AndreasWood

    New Member

  • Sustaining Members
  • 4 posts

Posted 11 October 2017 - 09:15 PM

For Sale:

Here’s a great Starter Rig or project for someone to tackle. My reliable old backup rig, which I bought from Denis Moran, in 2005.

I had been considering getting the HD-SDI upgrade from Hugo at Steadyrig for it and turning it into a running rig but have since abandoned that idea (though I would totally recommend that whoever does end up with this rig, talk to Hugo about his upgrades).

Everything works and the rig still flies very nicely.

SLED

GPI PRO I Post, Electronics & Battery system

CP IIIA Top Stage w/ 2 camera plates

CP IIIA Gimbal (w/ 2 PRO wrap grips: LG & SM)

Bartech BFD receiver mount.

8 Chocolate Bar Batteries, 4 were re-celled just over a year ago (I can have the rest done for $80 apiece, if you want) plus I have enough parts to make 1 more battery.

2 Aspen Chargers.

I’m also including an Anton Bauer Gold Mount Battery plate w/ PRO battery connector that I made for the sled (PRO connector can be removed and replaced with a 4-pin XLR, for plate use off the sled)… Super handy, even has two P-Tap connectors, great for powering an LCD monitor, for example.

Low mode/Practice cage (not pictured)

Dock

An assortment of Camera Power cables (Arri, Panavision, 12V XLR…)

2 focus rods

Marrell Green-screen monitor… bright and sharp!

The Batteries and chargers have a custom Calzone Case, everything else fits in a Pelican 1650.


ARM

CP Model II Steadicam Arm… an old arm but one that functions totally smoothly and silently and has a massive payload capacity. Seriously, I have no idea what the max capacity on the arm is but it’s got to be up there. I just shot some test video of me booming the rig with a maxed out Amira package and I can tell you with that payload the springs were only loaded to about 50%. Can't seem to post a link to the video here, so contact me if you'd like to see it.

 

2 Arm posts (6”, 12”) &  1 clamp

I’m asking:

SLED: $7,000
ARM:  $2,500

OR BOTH: $9,000

Kit is in LA.

Please send inquiries to andreaswood@me.com

Attached Files


  • 0

#2 AndreasWood

AndreasWood

    New Member

  • Sustaining Members
  • 4 posts

Posted Yesterday, 12:41 PM

PRICE REDUCED

 

SLED: $5,000

ARM: $1,500

 

BOTH: $6,000


  • 0




Paralinx LLC

Wireless Video Systems

Betz Tools for Stabilizers

Media Blackout - Custom Cables and AKS

Ritter Battery

Varizoom Follow Focus

IDX

PLC - Bartech

PLC Electronics Solutions

Teradek

rebotnix Technologies

SkyDreams

Engineered Cinema Solutions

GPI Pro Systems

BOXX

Omnishot Systems

Boland Communications