[Complete Steadicam System]
This system is now in LA, so LA-locals come see it.
The time has come for me to part ways with my starter steadicam rig! I bought the system about 2.5 years ago and it has done me well. The arm was recently serviced by Tiffen. The sled recently serviced electronically and mechanically by Terry West and Robert Luna so it is up to specs! This is a fantastic starter package for someone looking to get started with a pro rig.
Sled, monitor yoke, dock, and various bits and pieces come in a standard production hard case. Included is a universal mounting plate.
The sled is all upgraded internal HD and 24/12v internal power wiring. There's also an analog BNC and HD BNC that runs through the system. 2 Anton Bauer battery mounts have been added as an upgrade to the sled for power.
Cam jam monitor arm with yoke is a must have. Has greatly helped with my rig balancing and switching back and forth from low mode. You simply just flip the monitor and it doesn't change anything with the rig's balance. The yoke fits pretty much any monitor you'd want to put on it, but additional spacers may be required to fit the different monitors out there. I have spacers for a SmallHD DP7 that I will include.
You might be thinking that the Master Series sled doesn't fit onto the IIIA arm, and you are right! Luckily I got a new post from Robert Luna that makes the 2 compatible. Works flawlessly.
Ultra II vest shows some signs of regular use, but is still in great working condition. Safety release works perfectly, socket block is undamaged.
Bartech analog unit has been fantastic. Includes a hand unit, receiver, motor, and various power cables, motor cable, etc.
Anton Bauer LP2 Dual Gold Mount charger with 2 HC Dionic AB batteries. Both were recently sent back to Anton Bauer to get re-celled. The batteries are in perfect working order.
See below for a list of what's included. There are a few things I didn't talk about here.
-Master Series upgraded HD sled
-Low mode bracket
-Camjam monitor arm with yoke
-Various BNC cables, tools, miscellaneous bits and pieces
-Hard case for the sled, docking bracket, cam jam monitor arm and yoke
-CP IIIA arm
-Allen wrench for adjusting the arm tension
-Rain cover for the arm
-Master Series sled compatible post for IIIA arm
-Bag for the arm
-Ultra II vest with socket block (can be switched to either side of the vest)
-Soft bag for carrying the vest, arm, rain cover, and Mitchell hard mount
-Mitchell hard mount
-Bartech analog wireless follow focus receiver
-Bartech hand unit
-Wireless follow focus motor
-15mm rail adaptor for motor
-Power and motor cables for Bartech
-Bartech system carrying case
-Anton Bauer LP2 dual gold mount charger w/power cable
-2 HC Dionic AB batteries
Total is $20,400
This is practically everything you need in order to get operating. It would also make for a decent back-up rig. Please contact me if you have any questions. Buyer pays shipping costs, PayPal (or any other money transfer) fees. I'd prefer to do this over PayPal. Bill of sale will be sent to buyer.
If you refer someone else (who actually ends up buying the system, that is) I am willing to pay you $300. So please refer!
All pictures are of my equipment. No stock photos or anyone else's gear other than mine pictured.
PHOTOS ARE HERE (It wouldn't allow me to upload the photos here): https://www.flickr.c...0316@N05/5o0P4M