Jump to content


Custom lightweight base plates for Hyperdeck Shuttle

hyperdeck custom

  • Please log in to reply
No replies to this topic

#1 Thomas Crescenzo

Thomas Crescenzo

    Advanced Member

  • Sustaining Members
  • 30 posts
  • Newark, DE. USA

Posted 04 April 2016 - 05:30 PM

I made a short run of custom lightweight base plates for HyperDeck Shuttle recorders and currently have a few factory seconds left available. These plates have been milled out to keep their weight down to about the same as the stock plate that comes on the hyperdeck and adds less then 0.2" to the height of the recorder.


These factory seconds are fully functional but have a few marks in the anodizing or surface finish. Offering the factory seconds for $90.


I will be throwing in a set of aluminum studs with the first couple plates. I made these as a test batch and the fit is not quite perfect, but they do snap in and lock securely.

Attached Files

  • 0

Also tagged with one or more of these keywords: hyperdeck, custom

The Moses Pole - Steadicam Monopod

Paralinx LLC

Media Blackout - Custom Cables and AKS

Varizoom Follow Focus

Omnishot Systems


rebotnix Technologies

Wireless Video Systems

Engineered Cinema Solutions

Boland Communications

Betz Tools for Stabilizers

PLC - Bartech

GPI Pro Systems

PLC Electronics Solutions

Ritter Battery