Jump to content



Photo

GPI PRO CineLive 12v vs 24v output for cables

pro cinelive 12v 24v

  • Please log in to reply
1 reply to this topic

#1 brett.mayfield

brett.mayfield

    Advanced Member

  • Sustaining Members
  • 240 posts
  • hotlanta

Posted 28 January 2016 - 09:02 AM

Hi yall

When we flip the CineLive into 24v for using ARRI and other cameras, do the upper electronic switch out to 24v exclusively?

I am having cables made for a Chrosziel MagNum receiver and am wondering if I need a 12v and 24v cable, or 12v only.

The receiver does not care whether it receives 12v or 24v, it will push voltage independent of whats coming in.

Try as I might, I have a difficult time understanding electricity.

 

brett.


  • 0

#2 Jarrett P. Morgan

Jarrett P. Morgan

    Advanced Member

  • Sustaining Members
  • 225 posts
  • Los Angeles, CA

Posted 30 January 2016 - 02:19 AM

Brett,

If the device that you are powering can take 12v (and is fairly low amperage, i.e. not a power hungry camera) I tend to do all 12v cables out of the sled. I do this because the pro sled is always spitting out 12v out top, but there are situations in which you wouldn't be able to do 24v out at all (having a camera like the F65 that need so much 12v amperage you have to run both batteries in parallel)


  • 0





Also tagged with one or more of these keywords: pro, cinelive, 12v, 24v

PLC Electronics Solutions

Engineered Cinema Solutions

GPI Pro Systems

Media Blackout - Custom Cables and AKS

Varizoom Follow Focus

SkyDreams

Teradek

Boland Communications

Betz Tools for Stabilizers

IDX

Omnishot Systems

PLC - Bartech

Ritter Battery

BOXX

rebotnix Technologies

Paralinx LLC

Wireless Video Systems