Jump to content



Photo

NYC - Upgraded Ultra1 Sled that is HD/SDI, New Ultra2 Gimbal, HD Monitor, 3rd battery plate, IDX Batteries/Charger, and Camwave Tx/Rx- Asking $12,000

steadicam ultra 1 ultra 2 battery idx stand tilt stage super post nyc HD SDI

  • Please log in to reply
5 replies to this topic

#1 Devin Ladd

Devin Ladd

    New Member

  • Sustaining Members
  • 0 posts

Posted 02 January 2016 - 04:42 PM

I am regretfully selling my amazing starter sled, the Ultra 1.  I am selling because I recently upgraded to a more powerful rig to eventually get the artemis trinity setup.  I also am expecting a baby boy in april so I need to make some room!  I bought this sled from James Baldanza a few years back and it has been nothing but great.  I am looking to get $12,000 for the sled (and hard case),  a steadicam stand, IDX Battery Charger, (7) E-HL9s IDX Batteries (one of which charging lights doesn't work anymore), a bunch of cables, and I am throwing in the IDX Camwave HD/SDI wireless transmitter which even though you don't see around anymore still works in a jam.

 

The sled was recently serviced by Tiffen, I have had it upgraded with an HD/SDI line, as well as changing out the old gimbal to the new steadicam ultra 2 gimbal.  There is a third battery plate on the bottom of the sled, and has three different options for battery placement for power. This sled is a super post (27" to 71") so it can go super high mode or super low mode very quickly and easily.  It still has the fore/aft - left/right top stage wireless trim control which is one of the few sleds that still has this amazing option.  The tilt stage works like a wonderfully and maintains dynamic balance regardless of where you want to angle the camera.  I bought an HD/SDI wondland monitor to replace the super bright monitor from Tiffen because it was an older SD monitor and I wanted the HD.  It is a cheaper monitor, but works wonderfully and I have rarely had a problem with the light.  It can be powered off the sled or with an IDX battery on it's back.  

 

This setup also comes with three camera plates (two long and 1 short), three posts (12", 3.5" and 5"), the ultra 1 low mode handle which has been upgraded to work with this ultra 2 gimbal, a 12V power cable, arri alexa power cable, a few BNC cables, the redbyte decimator downconverter (for use with Tiffen superbright as a backup), cables for the decimator made by konash, and also power cables for MDR2 and MDR3 systems. 

 

 

Please feel free to call or email with any questions.

 

Devin Ladd

860-237-0754

devinmladd@gmail.com

 

 

Attached Files


  • 1

#2 Devin Ladd

Devin Ladd

    New Member

  • Sustaining Members
  • 0 posts

Posted 20 January 2016 - 09:48 PM

Price reduction $11,000!!
  • 0

#3 Devin Ladd

Devin Ladd

    New Member

  • Sustaining Members
  • 0 posts

Posted 22 March 2016 - 09:50 PM

So many people interested but no one closing.  Need to sell! Price Reduction to $8,000!!


  • 0

#4 James Baldanza SOC

James Baldanza SOC

    Advanced Member

  • Sustaining Members
  • 140 posts

Posted 23 March 2016 - 07:31 AM

That's a great price and solid sled!
  • 0

#5 Devin Ladd

Devin Ladd

    New Member

  • Sustaining Members
  • 0 posts

Posted 13 April 2016 - 10:02 AM

Bump!!
  • 0

#6 Devin Ladd

Devin Ladd

    New Member

  • Sustaining Members
  • 0 posts

Posted 15 May 2016 - 04:26 PM

Sold!
  • 0





Also tagged with one or more of these keywords: steadicam, ultra 1, ultra 2, battery, idx, stand, tilt stage, super post, nyc, HD SDI

Omnishot Systems

Betz Tools for Stabilizers

Boland Communications

Media Blackout - Custom Cables and AKS

Engineered Cinema Solutions

PLC - Bartech

BOXX

Varizoom Follow Focus

Paralinx LLC

Wireless Video Systems

rebotnix Technologies

GPI Pro Systems

Ritter Battery

Teradek

PLC Electronics Solutions

IDX

SkyDreams