Jump to content


Wrong load info on the battery Dionic 90

Dionic 90 Anton Bauer

  • Please log in to reply
2 replies to this topic

#1 Albert


    New Member

  • Members
  • Pip
  • 1 posts

Posted 30 November 2015 - 07:31 AM

I have an Anton Bauer battery Dionic 90, lately the battery display indicates to me that is 80% of the load, but the camera reads no load (and it is only with this battery), I do not know how to reset the display battery and that tells me the actual load. I start to charge the battery and tells me immediately that load from green blinking, so if there is no load, is not normal.

  • 0

#2 Victor Lazaro

Victor Lazaro

    Advanced Member

  • Sustaining Members
  • 1231 posts
  • Sunnyside Queens, NY

Posted 30 November 2015 - 11:27 AM

If you have a Charger that allows it (like the Inter Active 2000 series with a LCD screen), do a 24 hours battery test. This should recalibrate your battery.

Otherwise call Anton Bauer. If you are still having issues, reach out to John Ritter http://www.ritterbattery.com/to have your battery re-celled.

  • 1

#3 G. Grammatikos

G. Grammatikos

    Advanced Member

  • Members
  • PipPipPip
  • 98 posts
  • Greece

Posted 01 December 2015 - 03:20 AM

Near the display it have a small hole its a reset button

Edited by G. Grammatikos, 01 December 2015 - 03:21 AM.

  • 0

Also tagged with one or more of these keywords: Dionic 90, Anton Bauer

rebotnix Technologies

The Moses Pole - Steadicam Monopod

Wireless Video Systems

GPI Pro Systems

PLC Electronics Solutions

Omnishot Systems


Varizoom Follow Focus

Boland Communications

Media Blackout - Custom Cables and AKS

PLC - Bartech

Ritter Battery

Engineered Cinema Solutions

Paralinx LLC

Betz Tools for Stabilizers