Jump to content


cinetronics digital level

  • Please log in to reply
4 replies to this topic

#1 Brian Nordheim

Brian Nordheim


  • Sustaining Members
  • 29 posts

Posted 31 August 2015 - 10:59 PM

Anybody able to rewire the cinetronics level to work with the Small HD monitors


  • 0

#2 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1624 posts
  • Los Angeles, CA

Posted 01 September 2015 - 07:44 AM

it will not work or communicate with anything other than the Cinetronic Gen2

  • 0

#3 Alec Jarnagin SOC

Alec Jarnagin SOC

    Advanced Member

  • Moderators
  • PipPipPip
  • 1776 posts
  • New York City, USA

Posted 01 September 2015 - 09:45 AM

What Jens says.  The box is the sensor (which is external so you can mount it by the center post).  Much of the brains of it are built into the monitor (similiar to the way GPI used to do it with their green screen).

  • 0

#4 William Demeritt

William Demeritt

    Advanced Member

  • Sustaining Members
  • 1043 posts
  • Los Angeles, CA

Posted 01 September 2015 - 10:25 AM

The Cinetronics Digital Level is incompatible with other monitors much in the same way that computer hardware isn't always compatible with operating systems or specific software. The level is not open source, it doesn't use any standard data for the monitor to interpret and then display on screen. The interaction between the hardware within the CDL and the software running the Gen 2 monitor is specific to the Gen 2 monitor only. The CDL is just an IMU inside the case; the monitor is what interprets the data the IMU is spitting out.

  • 0

#5 RonBaldwin


    Advanced Member

  • Sustaining Members
  • 2351 posts
  • Los Angeles

Posted 02 September 2015 - 06:29 AM

Decaf Will...decaf
  • 0

GPI Pro Systems


Boland Communications

Paralinx LLC

Varizoom Follow Focus

Betz Tools for Stabilizers

PLC Electronics Solutions

PLC - Bartech

Omnishot Systems


Wireless Video Systems

Ritter Battery

Camera Motion Research


rebotnix Technologies