Jump to content



Photo

GPI Pro complete package for sale 62k obo

GPI Pro Titan Arm GPI Pro Sled Cinitronic Gen II Monitor XCS Ultimate Gimbal GPI Pro Vest Preston FIZ

  • Please log in to reply
2 replies to this topic

#1 Mark John Coyne

Mark John Coyne

    New Member

  • Sustaining Members
  • 1 posts

Posted 19 August 2015 - 01:18 PM

I'm selling my whole system as a complete package and not parting it out.  It will be available by the beginning of November.  It is easier to list everything by the case, so here goes:

                                                       CASE #1 Calzone Sled Case

GPI Pro Donkey Box Gen III, GPI Pro HD Upper Junction Box, GPI Pro Telescoping HD Post, GPI Pro MDR Dovetail T Bracket, XCS Ultimate Gimbal, GPI Pro Lower Junction Box, Pro Battery Rack Gen III with 3 Jumper Blocks, Pro Post Wrench, XCS Gimbal Wrench, Pro 3" Hand Grip (low mode), Jerry Hill Docking Bracket with 2 Docking Clamps, Anton Bauer Battery Plate to 4 Pin Cannon, CABLES: 2 X 12v Arri to Pro, 2 X Moviedom to Pro, 1 X Sony Video to Pro, 1 X 4 Pin Cannon to Pro (aux video pwr), 1 X Panavision 2 Pin to Pro, 2 X Panavision 3 Pin to Pro, 3 X 24v Arri to Pro, 1 X Red to Pro,

                                                       CASE #2 Pelican 1650

1 X Garfield Vehicle Mount, 1 X 12" Camera Plate, 1 X 9" Camera Plate, 2 X 7" Camera Plates, 1 X Sony Camera Plate, 1 X 6" Pro Arm Post with Collar, 1 X 8" Pro Arm Post with Collar, 1 X 12" Pro Arm Post with Collar, 1 X 12" Low Mode J Bracket Assembly with Collar, Assorted Screws, 1 X Antler to Camera Plate Bracket, 1 X Antler Riser, 4 X Brass Antler Weights, 3 X 15mm Rods for Camera Plates,

                                                       CASE # 3 Pelican 1650

1 X Anton Bauer TM4 Battery Charger with Cable, Various BNC Connectors, Bebob Zoe-eng Zoom Control for Cannon Zooms, Bartech Utility Zoom Control Box, 2 X Heydan Motor Cables, 1 X Pro 3 Pin Pwr to Bartech Utility Zoom Cable, 1 X Pro 4 Pin Pwr to Bartech Utility Zoom Cable, 1 X 2&1/4" gear for Hayden Motor, Libec ZC-9 Zoom Control For Cannon Zooms,

                                                       CASE #4 Pelican 1650

10 X Anton Bauer HC Dionic Batteries

                                                       CASE # 5 Pelican 1650

Preston MDR 2 Motor Driver, MDR Dovetail Mount Bracket, Preston Microwave Transceiver, Preston FIZ Hand Set, Preston FIZ Transmitter, 2 Short  Transmitter Antennas, I Short Receiver Antenna, 1 X Remote Iris Control with 8; Cable & Scale Plate, 2 x DM2 Motors with Pam Brackets, 5 X Various Pitched Gears, 2 X Spare Motor Gears, 8 X Focus Scale Rings, 1 X Iris Scale Plate, 1 X Pam Offset Extension, 2 X 15mm Pam Arms, 2 X 5/8 Pam Arms, 1 X Hill Variable Arm, 2 X 3' 15mm Rods, 1 X 15mm Bridge Bracket, 2 X Preston Batteries, 1 X Preston Charger with Cable, 1 X Omnishot Preston Battery Adapter, 1 X Omnishot High Capacity Battery, 1 X Omnishot Standard Capacity Battery, 2 X Omnishot Chargers, CABLES: 1 X Pro Pwr to Preston, 1 X 4 Pin Cannon Pwr to Preston, 3 X 3 Pin Arri Pwr to Preston, 2 X Panavision Pwr to Preston, 2 X Arri 3 Pin Run, 1 X Arri 11 Pin Run, 1 X Red Run, 1 X Sony Run, 1 X Panavision Run, 2 X Preston Motor Cables, 1 X Preston Hard Wire Cable

                                                       CASE #6 Pelican 1650

Cinitronic Steadicam Monitor Gen II, Cinitronic Monitor Yolk, GPI Pro Monitor Bracke, GPI Pro 4" Monitor Extender, CABLES: 3 X Pro Pwr to Monitor, 2 X 5' 75ohm Mogami BNC Jumpers, 2 X 5' 75ohm Spagetti BNC Jumpers, 3 X 7' 75ohm Mogami BNCs, 1 X 20" 75ohm Mogami BNCs, 3 X 24" 50ohm BNCs

                                                        CASE # 7 Pelican 1600

Modulus 3000 Transmitter with Antenna, 2 X Sony Receivers with Pwr Cables, i X CIT Antenna, CABLES: 2 X Aaton Pwr to Modulus, 2 X Panavision Pwr to Modulus, 1 X Arri 3 Pin Pwr to Modulus, 1 x Arri 11 Pin Pwr to Modulus, 2 X Pro Pwr to Modulus, 1 X 4 Pin Cannon Pwr to Modulus

                                                   BAG # 1

GPI Pro Vest, GPI Pro Titan Arm, 2 X Black Canisters, 2 X Blue Canisters,

Arm Bag,

Canister Bag with 2 additional Blue Canisters,

Steadicam 2 Stage Stand with 8" Pneumatic Wheels

 

email me for more info and photos at markcoyne60@gmail.com

Attached Files


  • 0

#2 Mark John Coyne

Mark John Coyne

    New Member

  • Sustaining Members
  • 1 posts

Posted 21 November 2015 - 09:07 PM

I need to find out how to delete this post.  For the time being I'll just have to

add to this post a notification that the entire package was sold as of today

11/21/15


  • 0

#3 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1656 posts
  • Los Angeles, CA

Posted 21 November 2015 - 11:28 PM

Only administration and moderator can delete post.
  • 0





Also tagged with one or more of these keywords: GPI Pro Titan Arm, GPI Pro Sled, Cinitronic Gen II Monitor, XCS Ultimate Gimbal, GPI Pro Vest, Preston FIZ

PLC - Bartech

SkyDreams

Paralinx LLC

Betz Tools for Stabilizers

Media Blackout - Custom Cables and AKS

Varizoom Follow Focus

BOXX

Ritter Battery

GPI Pro Systems

Omnishot Systems

PLC Electronics Solutions

Wireless Video Systems

IDX

Engineered Cinema Solutions

Teradek

rebotnix Technologies

Boland Communications