Jump to content


Hill Docking Bracket Release Tab Slop

  • Please log in to reply
1 reply to this topic

#1 Twojay Dhillon

Twojay Dhillon

    Advanced Member

  • Sustaining Members
  • 181 posts
  • Santa Monica, CA

Posted 08 May 2015 - 07:17 AM

Hey guys and girls,


Seeing if anybody has gotten bored and/or funemployed enough to try and figure out how to remove the slop from the red release tabs on the Hill docking bracket. I figured the slop was no big deal until I saw an AC trying to get my rig out of the dock. They shook my rig like a rag doll trying to get it out of there :'( I had to show them that the little red tabs have to go allllll the way down to release the rig.


Any help/write-ups appreciated!

  • 0

#2 Brian Freesh

Brian Freesh

    Advanced Member

  • Sustaining Members
  • 921 posts
  • Los Angeles, CA

Posted 08 May 2015 - 11:08 AM

If you look under them there is an allen screw on each one. If they come loose you get slop. If they come very loose they fall off. I find that I need to tighten them once or twice a year to remove slop.

  • 1

Paralinx LLC

Boland Communications

rebotnix Technologies


Ritter Battery

Wireless Video Systems

Varizoom Follow Focus


GPI Pro Systems

PLC Electronics Solutions

Omnishot Systems

Camera Motion Research

Betz Tools for Stabilizers


PLC - Bartech