Jump to content



Photo

Ultra Bright 2 being pesky...


  • Please log in to reply
5 replies to this topic

#1 John Hatcher

John Hatcher

    Advanced Member

  • Members
  • PipPipPip
  • 45 posts
  • South Florida

Posted 12 April 2015 - 06:02 PM

First, I'm using HDSDI.  Today I fired up my rig and my monitor isn't detecting SDI sync.  I tested with another monitor from top stage to bottom of the sled and the cabling is fine and outputting fine to second monitor. 

Now I've tried double checking settings in the Ultra Bright and everything looked ok input-wise.  Now the main Input/Config/ graphical menu has disappeared and only the textual video input menu is there.  I've powered down many times to see if it would come back and it has a couple of times, just for an instant, then disappears only to leave me with the textual input menu.  So, thus I can't get in and try a factory reset.  It will go into the beginning of programming mode, but I backed out of that.

 

Any ideas that might help? 

Gracias ahead of time!

J


  • 0

#2 Evrim KAYA

Evrim KAYA

    Advanced Member

  • Members
  • PipPipPip
  • 301 posts

Posted 12 April 2015 - 07:43 PM

Hey buddy!

 

did you try to feed the signal through the second hdsdi input?


  • 0

#3 John Hatcher

John Hatcher

    Advanced Member

  • Members
  • PipPipPip
  • 45 posts
  • South Florida

Posted 12 April 2015 - 08:05 PM

Hey!! I did, still nothing, the green other back there flashes like it sees signal. Strange... It's most frustrating why the menu won't load.
  • 0

#4 John Hatcher

John Hatcher

    Advanced Member

  • Members
  • PipPipPip
  • 45 posts
  • South Florida

Posted 12 April 2015 - 09:48 PM

By hitting Menu and one of the arrow buttons repeatedly, the config menu appears for like one second and before I can change any settings, it disappears again...
  • 0

#5 John Hatcher

John Hatcher

    Advanced Member

  • Members
  • PipPipPip
  • 45 posts
  • South Florida

Posted 13 April 2015 - 12:18 PM

Partially fixed it. So was going from a Sony a7s(HDMI)-Shogun-sled(HDSDI) and the cam was outputting 60i. The Ultra bright no likey. After forcing 24p down from cam to shogun, voilà! Now the question... Why no 60i on the Ultra bright?
  • 0

#6 Evrim KAYA

Evrim KAYA

    Advanced Member

  • Members
  • PipPipPip
  • 301 posts

Posted 13 April 2015 - 03:34 PM

great news (for now). it is a rehoused boland monitor. the software is theirs. so better ask them i suppose.


  • 0




Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

SkyDreams

BOXX

Varizoom Follow Focus

Boland Communications

Engineered Cinema Solutions

rebotnix Technologies

PLC - Bartech

Paralinx LLC

Wireless Video Systems

Omnishot Systems

Ritter Battery

Betz Tools for Stabilizers

GPI Pro Systems

Teradek

IDX