Jump to content


GPI Pro complete package for sale 67k obo

For Sale

  • Please log in to reply
2 replies to this topic

#1 Mark John Coyne

Mark John Coyne

    New Member

  • Sustaining Members
  • 1 posts

Posted 10 April 2015 - 04:06 PM

I'm selling my whole system and hence it is easier to list everything by the case, so here goes:

                                                       CASE #1 Calzone Sled Case

GPI Pro Donkey Box Gen III, GPI Pro HD Upper Junction Box, GPI Pro Telescoping HD Post, GPI Pro MDR Dovetail T Bracket, XCS Ultimate Gimbal, GPI Pro Lower Junction Box, Pro Battery Rack Gen III with 3 Jumper Blocks, Pro Post Wrench, XCS Gimbal Wrench, Pro 3" Hand Grip (low mode), Jerry Hill Docking Bracket with 2 Docking Clamps, Anton Bauer Battery Plate to 4 Pin Cannon, CABLES: 2 X 12v Arri to Pro, 2 X Moviedom to Pro, 1 X Sony Video to Pro, 1 X 4 Pin Cannon to Pro (aux video pwr), 1 X Panavision 2 Pin to Pro, 2 X Panavision 3 Pin to Pro, 3 X 24v Arri to Pro, 1 X Red to Pro,

                                                       CASE #2 Pelican 1650

1 X Garfield Vehicle Mount, 1 X 12" Camera Plate, 1 X 9" Camera Plate, 2 X 7" Camera Plates, 1 X Sony Camera Plate, 1 X 6" Pro Arm Post with Collar, 1 X 8" Pro Arm Post with Collar, 1 X 12" Pro Arm Post with Collar, 1 X 12" Low Mode J Bracket Assembly with Collar, Assorted Screws, 1 X Antler to Camera Plate Bracket, 1 X Antler Riser, 4 X Brass Antler Weights, 3 X 15mm Rods for Camera Plates,

                                                       CASE # 3 Pelican 1650

1 X Anton Bauer TM4 Battery Charger with Cable, Various BNC Connectors, Bebob Zoe-eng Zoom Control for Cannon Zooms, Bartech Utility Zoom Control Box, 2 X Heydan Motor Cables, 1 X Pro 3 Pin Pwr to Bartech Utility Zoom Cable, 1 X Pro 4 Pin Pwr to Bartech Utility Zoom Cable, 1 X 2&1/4" gear for Hayden Motor, Libec ZC-9 Zoom Control For Cannon Zooms,

                                                       CASE #4 Pelican 1650

10 X Anton Bauer HC Dionic Batteries

                                                       CASE # 5 Pelican 1650

Preston MDR 2 Motor Driver, MDR Dovetail Mount Bracket, Preston Microwave Transceiver, Preston FIZ Hand Set, Preston FIZ Transmitter, 2 Short  Transmitter Antennas, I Short Receiver Antenna, 1 X Remote Iris Control with 8; Cable & Scale Plate, 2 x DM2 Motors with Pam Brackets, 5 X Various Pitched Gears, 2 X Spare Motor Gears, 8 X Focus Scale Rings, 1 X Iris Scale Plate, 1 X Pam Offset Extension, 2 X 15mm Pam Arms, 2 X 5/8 Pam Arms, 1 X Hill Variable Arm, 2 X 3' 15mm Rods, 1 X 15mm Bridge Bracket, 2 X Preston Batteries, 1 X Preston Charger with Cable, 1 X Omnishot Preston Battery Adapter, 1 X Omnishot High Capacity Battery, 1 X Omnishot Standard Capacity Battery, 2 X Omnishot Chargers, CABLES: 1 X Pro Pwr to Preston, 1 X 4 Pin Cannon Pwr to Preston, 3 X 3 Pin Arri Pwr to Preston, 2 X Panavision Pwr to Preston, 2 X Arri 3 Pin Run, 1 X Arri 11 Pin Run, 1 X Red Run, 1 X Sony Run, 1 X Panavision Run, 2 X Preston Motor Cables, 1 X Preston Hard Wire Cable

                                                       CASE #6 Pelican 1650

Cinitronic Steadicam Monitor Gen II, Cinitronic Monitor Yolk, GPI Pro Monitor Bracke, GPI Pro 4" Monitor Extender, CABLES: 3 X Pro Pwr to Monitor, 2 X 5' 75ohm Mogami BNC Jumpers, 2 X 5' 75ohm Spagetti BNC Jumpers, 3 X 7' 75ohm Mogami BNCs, 1 X 20" 75ohm Mogami BNCs, 3 X 24" 50ohm BNCs

                                                        CASE # 7 Pelican 1600

Modulus 3000 Transmitter with Antenna, 2 X Sony Receivers with Pwr Cables, i X CIT Antenna, CABLES: 2 X Aaton Pwr to Modulus, 2 X Panavision Pwr to Modulus, 1 X Arri 3 Pin Pwr to Modulus, 1 x Arri 11 Pin Pwr to Modulus, 2 X Pro Pwr to Modulus, 1 X 4 Pin Cannon Pwr to Modulus

                                                   BAG # 1

GPI Pro Vest, GPI Pro Titan Arm, 2 X Black Canisters, 2 X Blue Canisters,

Arm Bag,

Canister Bag with 2 additional Blue Canisters,

Steadicam 2 Stage Stand with 8" Pneumatic Wheels


email me for more info and photos at markcoyne60@gmail.com




Attached Files

  • 1

#2 Chris Banting SOC

Chris Banting SOC


  • Sustaining Members
  • 23 posts
  • Vancouver, British Columbia, Canada

Posted 17 April 2015 - 10:49 AM

Would you be willing to sell the arm separately?

  • 0

#3 Mark John Coyne

Mark John Coyne

    New Member

  • Sustaining Members
  • 1 posts

Posted 20 April 2015 - 12:19 PM

No than you Chris.

  • 0

Also tagged with one or more of these keywords: For Sale


GPI Pro Systems

Wireless Video Systems

Betz Tools for Stabilizers

Ritter Battery


Omnishot Systems

Boland Communications

PLC Electronics Solutions

Paralinx LLC

Varizoom Follow Focus

rebotnix Technologies

PLC - Bartech


Camera Motion Research