Jump to content



Photo

HU2 Omnishot battery adapter and MicroForce issue


  • Please log in to reply
2 replies to this topic

#1 Andre Trudel

Andre Trudel

    Advanced Member

  • Sustaining Members
  • 151 posts

Posted 20 March 2015 - 08:33 PM

I have an HU2 with an Omnishot battery adapter. When I plug the Micro force V+F zoom control in and power up the hand unit, the low battery light just blinks really fast and is not operational. If I plug the zoom control in after powering up the HU2, it works just fine.

 

It’s definitely an omnishot adapter issue. When I use the stock Preston batteries everything works as it should.

 

Has anyone else experienced this issue? Is it ok to be plugging cables in while the unit is powered up like that?

 

Thanks.


  • 0

#2 Brad Hruboska

Brad Hruboska

    Advanced Member

  • Sustaining Members
  • 157 posts
  • Toronto

Posted 22 March 2015 - 10:05 AM

are you using bigger 7.2 v batteries like a 760 size? contact omnishot, they have been very proactive with me when ihad a adapter fiz out on me.


  • 0

#3 brett.mayfield

brett.mayfield

    Advanced Member

  • Sustaining Members
  • 262 posts
  • hotlanta

Posted 22 March 2015 - 09:51 PM

good to know. i have been getting the rapid blinking even without plugging in the microforce. ill be sure to contact them


  • 0




rebotnix Technologies

PLC Electronics Solutions

Ritter Battery

Varizoom Follow Focus

Paralinx LLC

The Moses Pole - Steadicam Monopod

PLC - Bartech

Engineered Cinema Solutions

GPI Pro Systems

Omnishot Systems

BOXX

Media Blackout - Custom Cables and AKS

Wireless Video Systems

Boland Communications

Betz Tools for Stabilizers