Jump to content


Popping the fuses on PRO sled

  • Please log in to reply
3 replies to this topic

#1 Victor Lazaro

Victor Lazaro

    Advanced Member

  • Sustaining Members
  • 1196 posts
  • Sunnyside Queens, NY

Posted 18 March 2015 - 05:50 PM

Do any of you pop the fuses on the sled instead of removing the batteries during breaks? Is that a bad thing to do?

  • 0

#2 RonBaldwin


    Advanced Member

  • Sustaining Members
  • 2351 posts
  • Los Angeles

Posted 18 March 2015 - 06:13 PM

I remove the batts or pull the plug from the camera/fitter/whatever.
  • 0

#3 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1624 posts
  • Los Angeles, CA

Posted 18 March 2015 - 06:33 PM

it's not bad, but they only have so many life cycle switches in them, it's like a clock counting down. usually 5000 cycles

  • 1

#4 Richard James Lewis

Richard James Lewis

    Advanced Member

  • Members
  • PipPipPip
  • 396 posts
  • London, UK

Posted 18 March 2015 - 06:45 PM

I always pull the fuses. Pull the monitor, leave the camera line on for the focus puller to do Preston things etc. I just use them as if they were power switches. Only had to replace one once when it snapped off (or someone snapped it off)


  • 0

Boland Communications



PLC - Bartech

GPI Pro Systems


Ritter Battery

Wireless Video Systems

Paralinx LLC

Varizoom Follow Focus

Camera Motion Research

Omnishot Systems

PLC Electronics Solutions

rebotnix Technologies

Betz Tools for Stabilizers