Jump to content


Cam-Jam Monitor Yoke

  • Please log in to reply
2 replies to this topic

#1 Justin Besser

Justin Besser

    Advanced Member

  • Sustaining Members
  • 75 posts
  • Sydney, Australia

Posted 17 March 2015 - 08:11 PM

been through all the posts but cant find anything specific ..

the Cam-Jam monitor yoke, anyone using it with a sachtler monitor arm ? (with transvideo cinemonitor 6inch)
notice any vibrations seeing as there are a few bits inbetween the post and it ..
got any photos ?

the quattro monitor bracket looks good but it doesn't break down without the rods which makes it more difficult to fit in a case and transport .. is there a place it releases other than from pulling out the rods ?

  • 0

#2 Alec Jarnagin SOC

Alec Jarnagin SOC

    Advanced Member

  • Moderators
  • PipPipPip
  • 1809 posts
  • New York City, USA

Posted 17 March 2015 - 09:23 PM

You can take it off the post via a Kipp handle or just pull the rods out.  There is no safety so its quick! (And a safety is not really needed since its held by four attachments - you'd have to blow through two stop signs sort of speak).

  • 0

#3 William Demeritt

William Demeritt

    Advanced Member

  • Sustaining Members
  • 1057 posts
  • Los Angeles, CA

Posted 17 March 2015 - 09:29 PM

I've got a SmallHD DP7-PROHB on the Cam-Jam yoke with a Sachtler tilting telescoping monitor arm. Never noticed any vibration or issues, so long as everything is screwed down tight in the tilting mechanism.

  • 0

PLC Electronics Solutions

Boland Communications

Paralinx LLC

rebotnix Technologies

Omnishot Systems

Ritter Battery

Media Blackout - Custom Cables and AKS

GPI Pro Systems

The Moses Pole - Steadicam Monopod

PLC - Bartech

Wireless Video Systems

Betz Tools for Stabilizers


Varizoom Follow Focus

Engineered Cinema Solutions