Jump to content



Photo

Bartech Remote Focus Kit- Analogue M-one & CP motors For Sale

Bartech Remote Focus BFD M-one Motor

  • Please log in to reply
3 replies to this topic

#1 Niranjan Martin

Niranjan Martin

    New Member

  • Sustaining Members
  • 1 posts
  • SoCal

Posted 09 March 2015 - 12:10 AM

Bartech Remote Focus Kit- Analog M-one & CP motors For Sale
 
Selling my Bartech Kit.
Asking $3800
It has lots of extras and is ready for Steadi or Studio work.
Mainly used as a backup remote focus for years. In great working condition.  Located in Los Angeles. Email me at rktdad@gmail.com and I will send more high res pics.
I am a new Member but 17 year local 600 Camera Assistant Member and  plenty of legit Ops on here can vouch for me if needed.
 
Bartech Kit-Contents:

Bartech Handset Serial Number T1.032

-5x Plastic Flexible Marking Strips
Tamrac Strap
 
Bartech MDR Serial Number R1.0032
This unit has a 2 pin lemo power input and a 2 pin half moon Lemo run port
-straight antanae
-right angle antanae
 
Cables
-1x 20 'Long 3 pin to 3 pin hardwire Data Cable
-2x 30" BFD Power- A/B P-tap power cable
-1x 12 volt 11 pin Fischer- 2 pin lemo start/stop cable (Arri film!) 
-1x 12 volt 11 pin Fischer- 2 pin lemo Bartec Power cable (Arri film!) 
-2x 24" 3 Pin arri Y cable 24volt to 12 volt reduction with Power/start stop 
 
(Alexa or any Arri film camera 3 pin fischer to an inline box with voltage reducer to 2 Bartech 2 pin outs to power and carry start/stop signal)
 
-1x18" Panavision Power/start/stop cable 24volt-12volt
  10 pin half moon lemo cable to Y-box with Bartec power & Run cables
 
-1x 25" 2 pin half moon lemo to 2 pin half moon lemo cable ( can be used to make more cables)
-1x Cable #5795 BFD To Sony  Run/Stop (12pin)
-1x Cable #5010 BFD To Red One Run/Stop (4 pin)
2 different mounting brackets ( see pics)
 
M-one Motor  M-1.0176 with collars and rod and gear adapter 
Dog Bone Mounting bracket with 15,17,19mm Collars and Short Rod
1/4" .8m-32 pitch gear 
1/2" .8m-32 pitch gear ( for super speeds or lenses that travel)
1/4" .4m-64 pitch gear  (PV Iris Gear)
1/4" .8m-48 pitch gear (PV Zoom Gear)
1/4" .6m- gear 
1/4" .5m- gear 
5 pin- 5pin Analog motor cables ( will work with both motors)
-1x 6' Black
-1x 23" grey
-1x 30" motor cable with in-line voltage reducer (built by Jim Bartel)
 
Cinema Products CP motor #243
This was the original Motor used with these units before the M-one was released. still works fine. Came with it when I bought it.
Has various collars for different sized rods.
Has various pitch gears and a fat arri gear for super speeds.

Niranjan Martin
Camera Dude
rktdad@gmail.com 
 
Attached File  IMG_7175small.jpg   153.3KB   9 downloadsAttached File  IMG_7173small.jpg   168.76KB   9 downloadsAttached File  FullSizeRendersmall.jpg   160.29KB   10 downloads
 

Attached Files


  • 0

#2 Niranjan Martin

Niranjan Martin

    New Member

  • Sustaining Members
  • 1 posts
  • SoCal

Posted 13 March 2015 - 05:31 PM

Price Bump to $3500


  • 0

#3 Niranjan Martin

Niranjan Martin

    New Member

  • Sustaining Members
  • 1 posts
  • SoCal

Posted 23 March 2015 - 12:47 AM

sold!
Thank you for the inquiries.
  • 0

#4 Niranjan Martin

Niranjan Martin

    New Member

  • Sustaining Members
  • 1 posts
  • SoCal

Posted 23 March 2015 - 12:49 AM

I have another Bartec analog -M-one motor kit with cables I will be listing in s day or two. Located in LA
Email if interested rktdad@gmail.com

Thx
  • 0




GPI Pro Systems

BOXX

Boland Communications

Varizoom Follow Focus

PLC - Bartech

PLC Electronics Solutions

Betz Tools for Stabilizers

Media Blackout - Custom Cables and AKS

Teradek

Ritter Battery

rebotnix Technologies

Paralinx LLC

Omnishot Systems

Engineered Cinema Solutions

IDX

SkyDreams

Wireless Video Systems