Jump to content



Photo

Provid Hirose connector


  • Please log in to reply
2 replies to this topic

#1 Jason Williams

Jason Williams

    Advanced Member

  • Sustaining Members
  • 189 posts
  • Lancashire, UK

Posted 25 September 2005 - 03:47 PM

I need to find out which pin is which for the hirose connector for the Provid monitor, does anyone know which pin goes where?

Thanks in advance.

Jason
  • 0

#2 Jason Torbitt

Jason Torbitt

    Advanced Member

  • Sustaining Members
  • 401 posts
  • Manchester, London UK

Posted 25 September 2005 - 05:42 PM

Hi Jason

Is it a single HRS4 for power & video? If so, here's the master series pinout from the manual. I would imagine it's the same for the ProVid but make sure you get confirmation first...

Hirose 4-pin

Pin 1: Power Ground
Pin 2: Video Ground
Pin 3: Video Out
Pin 4: + 12v DC Regulated (1 Amp Max)

Good luck
  • 0

#3 Jason Williams

Jason Williams

    Advanced Member

  • Sustaining Members
  • 189 posts
  • Lancashire, UK

Posted 25 September 2005 - 05:48 PM

Hi Jason,

Sounds like the right one to me, it's a 4 pin, both video and power yeah, will check the monitor side to see what pin goes to which cable but that should get me sorted!

Thanks for your help :D
  • 0




Boland Communications

rebotnix Technologies

PLC Electronics Solutions

Engineered Cinema Solutions

GPI Pro Systems

The Moses Pole - Steadicam Monopod

PLC - Bartech

Media Blackout - Custom Cables and AKS

Wireless Video Systems

Paralinx LLC

Ritter Battery

Omnishot Systems

Betz Tools for Stabilizers

BOXX

Varizoom Follow Focus