Jump to content



Photo

Garage Sale - Take it all for $800US

Canatrans Decimator Bartech PRO Mickey XCS

  • Please log in to reply
7 replies to this topic

#1 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 30 January 2015 - 06:30 PM

Take everything (13 items) for $800.00US or individual items, prices below:

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. XCS Alexa Adapter Plate

New $450.00 -  Asking $250.00 US

Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity.

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. RedByte Decimator Version 1 DownConverter

Asking $100.00 US

Comes with 1 hirose power cable and 1 A/C adapter. 

 

5. Bartech Analog Receiver Matte Box Mounting Bracket

New $200 - Asking $100.00 US

 

6. Two Bartech Analog Gimbal Hard Wired Focus Modules (2)

New $100 each - Asking $80.00 for two

Plugs directly into receiver and has a small finger wheel to dial focus.

 

7. Mickey Dynamic Level for 2 inch Post

New $120 - Asking $50.00 US

The Vinyl wheels are a little worn but it still works.

 

8. PRO Low Mode “J” Bracket  

Asking $50.00 US

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. PRO DB2 MDR2 Dovetail/Bracket Mount

Asking $50.00 US

I don’t have any screws.

 

11. Steadicam Gimbal J-7 Zoom Control

Asking $50.00 US

Comes with Hirose to 8 Pin Canon and 12 pin Fuji

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.

 

Please email me mike @ mikeheathcote.com

Attached Files


  • 0

#2 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 30 January 2015 - 07:42 PM

#11. J7 ZOOM SOLD Thanks

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. XCS Alexa Adapter Plate

New $450.00 -  Asking $250.00 US

Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity.

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. RedByte Decimator Version 1 DownConverter

Asking $100.00 US

Comes with 1 hirose power cable and 1 A/C adapter. 

 

5. Bartech Analog Receiver Matte Box Mounting Bracket

New $200 - Asking $100.00 US

 

6. Two Bartech Analog Gimbal Hard Wired Focus Modules (2)

New $100 each - Asking $80.00 for two

Plugs directly into receiver and has a small finger wheel to dial focus.

 

7. Mickey Dynamic Level for 2 inch Post

New $120 - Asking $50.00 US

The Vinyl wheels are a little worn but it still works.

 

8. PRO Low Mode “J” Bracket  

Asking $50.00 US

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. PRO DB2 MDR2 Dovetail/Bracket Mount

Asking $50.00 US

I don’t have any screws.

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.


  • 0

#3 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 30 January 2015 - 11:57 PM

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#11. J7 ZOOM SOLD

Thanks

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. XCS Alexa Adapter Plate

New $450.00 -  Asking $250.00 US

Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity.

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. RedByte Decimator Version 1 DownConverter

Asking $100.00 US

Comes with 1 hirose power cable and 1 A/C adapter. 

 

5. Bartech Analog Receiver Matte Box Mounting Bracket

New $200 - Asking $100.00 US

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. PRO Low Mode “J” Bracket  

Asking $50.00 US

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. PRO DB2 MDR2 Dovetail/Bracket Mount

Asking $50.00 US

I don’t have any screws.

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.


  • 0

#4 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 31 January 2015 - 09:45 AM

#5. Bartech MatteBox Mount SOLD

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#8. PRO J Bracket SOLD

#10. PRO MDR 2 Mount SOLD

#11. J7 ZOOM SOLD

Thanks!

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. XCS Alexa Adapter Plate

New $450.00 -  Asking $250.00 US

Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity.

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. RedByte Decimator Version 1 DownConverter

Asking $100.00 US

Comes with 1 hirose power cable and 1 A/C adapter. 

 

5. ***SOLD *** Bartech Analog Receiver Matte Box Mounting Bracket ***SOLD***

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. ***SOLD*** PRO Low Mode “J” Bracket ***SOLD***

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. ***SOLD*** PRO DB2 MDR2 Dovetail/Bracket Mount ***SOLD***

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.


  • 0

#5 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 01 February 2015 - 09:24 AM

#4. RedByte DownConverter SOLD

#5. Bartech MatteBox Mount SOLD

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#8. PRO J Bracket SOLD

#10. PRO MDR 2 Mount SOLD

#11. J7 ZOOM SOLD

Thanks!

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. XCS Alexa Adapter Plate

New $450.00 -  Asking $250.00 US

Attaches to the bottom of the ARRI BPA plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity.

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. ***SOLD*** RedByte Decimator Version 1 DownConverter ***SOLD***

 

5. ***SOLD *** Bartech Analog Receiver Matte Box Mounting Bracket ***SOLD***

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. ***SOLD*** PRO Low Mode “J” Bracket ***SOLD***

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. ***SOLD*** PRO DB2 MDR2 Dovetail/Bracket Mount ***SOLD***

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.


  • 0

#6 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 01 February 2015 - 05:35 PM

#2. Arri Alexa Plate SOLD

#4. RedByte DownConverter SOLD

#5. Bartech MatteBox Mount SOLD

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#8. PRO J Bracket SOLD

#10. PRO MDR 2 Mount SOLD

#11. J7 ZOOM SOLD

Thanks!

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US

Comes with two Antennas and 1 Ptap Power Cable.

 

2. ***SOLD*** XCS Alexa Adapter Plate ***SOLD***

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. ***SOLD*** RedByte Decimator Version 1 DownConverter ***SOLD***

 

5. ***SOLD *** Bartech Analog Receiver Matte Box Mounting Bracket ***SOLD***

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. ***SOLD*** PRO Low Mode “J” Bracket ***SOLD***

 

9. XCS Transmitter Bracket

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. ***SOLD*** PRO DB2 MDR2 Dovetail/Bracket Mount ***SOLD***

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. Camera Comfort Cushion

New $60.00 – Asking $30.00 US

Comes with two pads.


  • 0

#7 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 02 February 2015 - 11:14 AM

#2. Arri Alexa Plate SOLD

#4. RedByte DownConverter SOLD

#5. Bartech MatteBox Mount SOLD

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#8. PRO J Bracket SOLD

#10. PRO MDR 2 Mount SOLD

#11. J7 ZOOM SOLD

#13. Camera Cushion SOLD

Thanks!

 

1. Canatrans NTSC Transmitter S/N 1001

New $1500.00 -  Asking $400.00 US *New PRICE asking $300.00 US*

Comes with two Antennas and 1 Ptap Power Cable.

 

2. ***SOLD*** XCS Alexa Adapter Plate ***SOLD***

 

3. XCS/BPA for ARRI Alexa

New $200.00 -  Asking $100.00 US *New PRICE asking $50.00 US*

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates.

 

4. ***SOLD*** RedByte Decimator Version 1 DownConverter ***SOLD***

 

5. ***SOLD *** Bartech Analog Receiver Matte Box Mounting Bracket ***SOLD***

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. ***SOLD*** PRO Low Mode “J” Bracket ***SOLD***

 

9. XCS Transmitter Bracket *New PRICE asking $25.00 US*

New $150.00 – Asking $50.00 US

Attaches to the dovetail on the rear of the camera plate and on the lower electronics housing of the Ultimate sled.

Keeps the transmitter at the highest point at all times.

 

10. ***SOLD*** PRO DB2 MDR2 Dovetail/Bracket Mount ***SOLD***

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. Teradek Bolt Pro Fanless Receiver Cage for TV Logic VFM-056WP monitor and battery plate with hole for Lemo Socket

New $100 for both – Asking $50.00 US *New PRICE asking $25.00 US*

Designed by KarWai on Shapeways. Brand New never used. More details here: http://www.shapeways...ogic-vfm056?and http://www.shapeways...tionId=41548180 and http://www.shapeways...tionId=41548180

 

13. ***SOLD*** Camera Comfort Cushion ***SOLD***


  • 0

#8 Mike Heathcote SOC

Mike Heathcote SOC

    Member

  • Sustaining Members
  • 18 posts
  • Toronto, Ontario

Posted 04 February 2015 - 08:03 AM

Everything has been SOLD! Thanks.

 

#1. Canatrans SOLD

#2. Arri Alexa Plate SOLD

#3. XCS BPA Plate SOLD

#4. RedByte DownConverter SOLD

#5. Bartech MatteBox Mount SOLD

#6. Bartech Gimbal Focus Modules SOLD

#7. Mickey SOLD

#8. PRO J Bracket SOLD

#9. XCS Transmitter Bracket SOLD

#10. PRO MDR 2 Mount SOLD

#11. J7 ZOOM SOLD

#12. TV Logiv Bolt Bracket SOLD

#13. Camera Cushion SOLD

 

Thanks!

 

1. ***SOLD*** Canatrans NTSC Transmitter ***SOLD***

 

2. ***SOLD*** XCS Alexa Adapter Plate ***SOLD***

 

3. ***SOLD*** XCS/BPA for ARRI Alexa ***SOLD***

 

4. ***SOLD*** RedByte Decimator Version 1 DownConverter ***SOLD***

 

5. ***SOLD *** Bartech Analog Receiver Matte Box Mounting Bracket ***SOLD***

 

6. ***SOLD*** Two Bartech Analog Gimbal Hard Wired Focus Modules (2) ***SOLD***

 

7. ***SOLD*** Mickey Dynamic Level for 2 inch Post ***SOLD***

 

8. ***SOLD*** PRO Low Mode “J” Bracket ***SOLD***

 

9. ***SOLD*** XCS Transmitter Bracket ***SOLD***

 

10. ***SOLD*** PRO DB2 MDR2 Dovetail/Bracket Mount ***SOLD***

 

11. ***SOLD*** Steadicam Gimbal J-7 Zoom Control ***SOLD***

 

12. ***SOLD*** Teradek Bolt Pro Fanless Receiver Cage for TV Logic ***SOLD***

 

13. ***SOLD*** Camera Comfort Cushion ***SOLD***


  • 0





Also tagged with one or more of these keywords: Canatrans, Decimator, Bartech, PRO, Mickey, XCS

Paralinx LLC

BOXX

Omnishot Systems

rebotnix Technologies

Teradek

SkyDreams

Boland Communications

PLC Electronics Solutions

Wireless Video Systems

Media Blackout - Custom Cables and AKS

GPI Pro Systems

Betz Tools for Stabilizers

IDX

Engineered Cinema Solutions

PLC - Bartech

Ritter Battery

Varizoom Follow Focus