Jump to content



Photo

AB plate loose wire


  • Please log in to reply
3 replies to this topic

#1 Jason Glucksman

Jason Glucksman

    New Member

  • Sustaining Members
  • 6 posts

Posted 13 January 2015 - 06:04 PM

My AB battery plate has a wire that came undone and I assume it connects to the part on the back plate.  Any advice on how I would get this back in?  There's no slot for the end to go in, so if it does connect to the back plate, would it need to be soldered on? 

Attached Files

  • Attached File  AB.jpg   119.64KB   3 downloads

  • 0

#2 Jarrett P. Morgan

Jarrett P. Morgan

    Advanced Member

  • Sustaining Members
  • 225 posts
  • Los Angeles, CA

Posted 13 January 2015 - 09:16 PM

The part on the sled there is a diode to prevent cross-charging.

 

It looks like the pin on the diode snapped off. You should find another one of the same type (probably a Schottky diode) and replace it. Shouldn't be more than 2 bucks.


  • 0

#3 Alan Rencher

Alan Rencher

    Advanced Member

  • Sustaining Members
  • 1091 posts
  • Los Angeles

Posted 13 January 2015 - 09:16 PM

Jarrett got there first.


  • 1

#4 Jason Glucksman

Jason Glucksman

    New Member

  • Sustaining Members
  • 6 posts

Posted 13 January 2015 - 11:58 PM

Thanks - just ordered one.
  • 0




PLC Electronics Solutions

Paralinx LLC

Varizoom Follow Focus

GPI Pro Systems

Wireless Video Systems

IDX

SkyDreams

Teradek

Engineered Cinema Solutions

BOXX

Betz Tools for Stabilizers

Boland Communications

PLC - Bartech

rebotnix Technologies

Omnishot Systems

Media Blackout - Custom Cables and AKS

Ritter Battery