I had this Rig in the forum before. Someone wanted to buy it,
but I do not know if I want to deal with him.
( I will not go into details, but I just do not know if I can trust this guy).
The rig is located in GERMANY, near Frankfurt
It is a good , reliable rig and has done me good work over some years.
The rig is SD, but can be converted into an HD-rig by Baerbel.
It is also possible , to upgrade it with an extendable fibre carbon post by Baerbel.
The arm has been serviced in April.
Baerbel Sled 12/24 V titanium post, (in custom made case)
3x long dovetails, 1x short,
15mm rods, 19mm rods, sony-plate,
Superpost titanium 90cm (has a dent/bump but works fine)
Superpost titanium 115cm, never used
It could be shortened by Baerbel to a 90cm post, if the dent in the 90cm longpost botheres You.
Post with extra extension cable for working with superposts.
Some BNC cable,
12V Power cable, 1 xARRI-Power 24V
Frameliner / Electronic bubble Eiwa TriusX. Was a prototype, that is why the housing of it is just taped together. Allways worked fine.
Baerbel Arm (in peli case)
payload up to 37 kg !
with a couple of rods, washers, J-Bracket and one
special, extra long j-bracket-rod . This one gives You the little more extra if you need it.
I used it a lot.
(Arm has been serviced at BAERBEL in April).
I really used that west a lot. It still works, but some maintaining
should be done to it.
Some new belts/spare parts come with it.
I was just too lazy to renew it.
(in peli case)
Transvideo Cinemonitor III (not 3a)
(has a little chip in the glas broken off, but unvisible when in action)
power cable + power cable for topstage
special cables to use together with the frameliner
Not the newest but works fine
( in two cases)
9 x Anton Bauer
Trimpack 45WH with PAG Charger/Discharger ARI24PLD and
the batteries all work fine, but
2 of them might need a recell
1 Battery has a crack, because my Assistent dropped it. I checked it. It is okay and keeps the full voltage.
Red Bite Decimator 1 ( SDI to SD, not HDMI!) with mounting-bracket for the rig
(Used it with RED, Alexa and some other HD Cams .Allways worked fine)
BFD analog follow focus + Heden M28VP Motor
Gears : 0,4 0,5 0,6 + 0,8
( all in a peli case)
Receiver ( Plastic housing of antenna has been lost, but works 100%)
7 custom made focus rings
original BFD focus strips
1 motor cable, regular
1 long motor cable
1 power cable hirose (from rig) to 2pin (to receiver)
1 arri run cable (film)
1 arri run adapter (sr2/3)
1power cable XLR 5pin (male)
1 Adaptercaple XLR 5 pin (female) to D-tap
Some adapters from 15mm-15mm and 15mm to 19mm
-Cat-Griller ( to change quickly from Steadicam to Tripod without changing baseplate/dovetail)
-"Sushi-Server" Low Mode Cage (In my opinion the best Low-Mode Cage avaiable.Used it
with 435, 235, DVC-Pro,SR3,416,Red......)
-Hardmount for EURO-Mount. (Used it on some commercials, attached to a Quad and Car)
-Different weight plates around 2,5kg (aluminium+iron) with holes for attaching catgriller and doveplate and srews to fix them together . I got these plates made mainly for training.
Used them on a lot on shoots, when the camera was just to light.( C300, FS700, DSLR......)
( Shipping those plates will make shipping cost more expensive. I is probably much cheaper, to just get some plates yourself and drill some holes in them!
some giveaways on top, without a guaranty if they still work:
- 1 old transvideo cinemonitor I, I think it still works, but didn´t use it for a long time
- 1 analogue Video Transmitter EIWA VATBoy. Allways worked good, but I did not use it for a long time.It was at least as good as a modulus.
For the whole package including the BFD I would like to get 13.500 € that is about 18.000 $
I am open for serious offers.
I might be willing to split up the package, but prefer selling as a complete package.
Buyer pays shipment and taxes. European buyers will have to pay VAT on it!
(If from the US: Shipment from Europe to the States is probably around 1000 €)
more pictures for download : www.rebel-pictures.de/pics/steadifotos_web.zip
mail me : firstname.lastname@example.org
me a call +49-151-2234-2219
all the best