Jump to content


DB2/1 on MK-V sled?

  • Please log in to reply
5 replies to this topic

#1 richard bellon

richard bellon

    Advanced Member

  • Sustaining Members
  • 130 posts

Posted 30 July 2014 - 04:34 AM

Hi all I'm thinking about changing top stage of my MK-V for a PRO Donkey box 3/2/1 Is it possible or do u need the upper electronics for it to fit? The post has the 4 screws holes that I think are the same.
  • 0

#2 RonBaldwin


    Advanced Member

  • Sustaining Members
  • 2351 posts
  • Los Angeles

Posted 30 July 2014 - 05:56 AM

Should all be good
  • 0

#3 Michael Wilson

Michael Wilson

    Advanced Member

  • Sustaining Members
  • 181 posts

Posted 30 July 2014 - 12:41 PM

I have the MKV with DB2 setup.  Works well.  I have my jbox tied into the preston mount in front of the stage.  This brings the jbox closer to the post.  Which makes it nearly impossible for a couple of my larger lemo connectors to go in the jbox post side.  Have an adapter made to get it out a little further or get some 90 degree cables if you need.  

  • 0

#4 thomas-english


    Advanced Member

  • Sustaining Members
  • 1163 posts
  • UK

Posted 30 July 2014 - 06:44 PM

It should be fine. You just need an adaptor made for two 15mm bars to come out the front, a C-Spacer for your top of of your post and let the centre cable out and some longer screws. I am sure Ash at MK-V would be more than happy to help. 

  • 0

#5 richard bellon

richard bellon

    Advanced Member

  • Sustaining Members
  • 130 posts

Posted 31 July 2014 - 01:47 AM

Tx guys
  • 0

#6 Sam Law

Sam Law

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 26 October 2014 - 07:11 PM

I have gen 2 electronics on my mk-v nexus, with a db2, so those are at least compatible

  • 0


Betz Tools for Stabilizers


Boland Communications

rebotnix Technologies

PLC Electronics Solutions

Paralinx LLC

GPI Pro Systems


PLC - Bartech

Camera Motion Research

Ritter Battery

Omnishot Systems

Varizoom Follow Focus

Wireless Video Systems