My BAERBEL is collecting dust since I am mainly doing DoP now, so it finally has to go
It is located in GERMANY, near Frankfurt
The rig has been regulary serviced and tuned
It has never let me alone on any shoot and has been used on
Commercials,Dokus,Musicvideos,Movies,......with all kinds of
cameras (From 35, to 16 ,from RED to HD, Beta,even 5d).
Some of those shots are on my homepage at www.rebel-pictures.de
It has been allways treated nicely, but as it is with a tool beeing
used, it has some scratches too.
The rig is SD, but can be converted into an HD-rig by Baerbel.
It is also possible , to upgrade it with an extendable fibre carbon post by Baerbel.
Arm is newly seviced.
I am only selling the rig as a complete package !
Baerbel Sled 12/24 titanium post, 3x
long dovetails, 1x short, 15mm rods, 19mm rods, sony-plate,
"micky"dynamic balance,tools,srews (in custom made case)
Superpost titanium 90cm (has a dent/bump but works
Superpost titanium 115cm, never used ( if You want to
get lower than ground level or very high. Bought it for a
film with horses, that than wasn´t filmed)
It could be shortened by Baerbel to a 90cm post, if the dent in the 90cm longpost botheres You.
Post with extra extension cable for working with superposts.
Some BNC cable,
12V Power cable, 1 xARRI-Power 24V
Baerbel Arm (in peli case)
with a couple of rods, washers, J-Bracket and one
special, extra long j-bracket-rod . This one gives You the little more extra if you need it.
I used it a lot.
(just put it through the top of the arm and attach the j-bracket to it (see picture).
I really used that west a lot. It still works, but some maintaining
should be done to it.It never bothered me.
Some new belts/spare parts come with it.
I was just too lazy to renew it.
Transvideo Cinemonitor III (not 3a)
power cable + power cable for topstage
Not the newest but works fine (in peli case)
9 x Anton Bauer
Trimpack 45WH with PAG Charger/Discharger ARI24PLD and 3
charging-adaptors ( in two cases)
the batteries all work fine, but
2 of them might need a recell
Red Bite Decimator ( SDI to SD, not HDMI!) with mounting-bracket for the rig (Used
it with RED, Alexa and some other HD Cams .Allways worked fine)
Low Mode Cage (In my opinion the best Low-Mode Cage avaiable.Used it
with 435, 235, DVC-Pro,SR3,416,Red......)
-Hardmount for EURO-Mount. (Used it on some commercials, attached to a Quad and Car)
-Different weight plates around 2,5kg (aluminium+iron) with holes for attaching
catgriller and doveplate and srews to fix them together . I got these plates made mainly for training.
They allowed me to get my little training camera up to 18kg !
But I also used them on a lot on shoots, when the camera
was just to light.Just attach cat-griller to the top, a
dovetail to the bottom and you can use it in between your camera and the rig.
( Shipping those plates will make shipping cost more expensive. I is probably much cheaper, to just get some plates yourself and drill some holes in them!
But they are part of this setup and if you want them, you can have them)
- 1 old transvideo cinemonitor I,
I think it still works, but didn´t use it for a long time
The frameliner in the picture is not part of this sale! it´s a prototype i have been given to test.
Asking 12.000,- €
Buyer pays shipment and taxes. European buyers will have to pay VAT on it!
(If from the US: Shipment from Europe to the States is probably around 1000 €)
As written before: ONLY SELLING AS COMPLETE PACKAGE !
more pictures for download : www.rebel-pictures.de/pics/steadifotos_web.zip
mail me : firstname.lastname@example.org
me a call +49-151-2234-2219
all the best