Jump to content


Monitor Yokes?

  • Please log in to reply
9 replies to this topic

#1 Dave Chameides

Dave Chameides

    Advanced Member

  • Sustaining Members
  • 169 posts

Posted 15 September 2013 - 07:25 AM

Wondering who is loving their "best thing I've ever bought" monitor yokes and if so who makes them.



  • 0

#2 Philip J. Martinez SOC

Philip J. Martinez SOC

    Advanced Member

  • Sustaining Members
  • 253 posts
  • New York, NY

Posted 15 September 2013 - 07:45 AM


I've been very happy with his one.
  • 0

#3 Osvaldo Silvera SOC

Osvaldo Silvera SOC

    Advanced Member

  • Sustaining Members
  • 645 posts
  • Miami, FL

Posted 15 September 2013 - 08:44 PM

Same here with the Cam Jam, Amazing product. 

Expensive, but well worth it!

  • 0

#4 Benjamin Treplin

Benjamin Treplin

    Advanced Member

  • Sustaining Members
  • 285 posts
  • Berlin - Germany

Posted 16 September 2013 - 12:10 AM

Happiness here too. Lightweight and rocksolid.

Attached Files

  • 0

#5 Marc R. Berger

Marc R. Berger

    Advanced Member

  • Sustaining Members
  • 76 posts

Posted 16 September 2013 - 05:31 AM

Could I mount it on to 19mm rods with 100 spacing?



  • 0

#6 Matthias Biber

Matthias Biber

    Advanced Member

  • Sustaining Members
  • 59 posts

Posted 16 September 2013 - 11:58 AM

The Quattro Monitor Arm http://cam-jam.de/qma.html is the connection between the monitor on the one end and the centerpost on the other end. You don´t need any other rods or arms.



it clamps the rods in front and back of the centerpost, so it is much stronger than the other arms



The "Yoke only" from http://cam-jam.de/yoke.html is just the connection between your existing arm with a 1/2" spud and the monitor. Works with XCS, PRO, Sachtler, Betz, MK-V arms.




  • 0

#7 bobgorelick



  • Sustaining Members
  • 13 posts
  • Los Angeles

Posted 16 September 2013 - 03:31 PM

I have been using Mathias Biber's cam/jam yoke for several weeks and like it a lot.  Beautifully engineered and machined. And best of all.... simple!

  • 0

#8 JobScholtze


    Advanced Member

  • Sustaining Members
  • 1359 posts
  • Netherlands

Posted 06 October 2013 - 04:40 AM

I too recieved mine from Mathias. Its so great, i ordered another one for my second sled. I bought it complete with the monitor bracket, wich is far better then the original mk-v one i had. I had vibration issues, and there gone now. Very, very happy with it.



Attached Files

  • Attached File  foto.JPG   557.53KB   97 downloads

  • 0

#9 John Joyce

John Joyce


  • Sustaining Members
  • 13 posts

Posted 07 February 2014 - 02:57 PM

I have been using Matthias's Quattro yoke/arm setup for about 2 weeks and I like it...a LOT! It is very well thought out, beautifully machined, simple to use and most important rock solid. I also really like how the mount holds the monitor so that the cg and balance don't change as the monitor angle changes.
It is expensive, but well worth the cost.
Nicely done.
  • 1

#10 thomas-english


    Advanced Member

  • Sustaining Members
  • 1163 posts
  • UK

Posted 07 February 2014 - 03:17 PM

Hey, I've just been using Transvideos monitor yoke upside down. Been very solid. 


Matthias's one does look great. 

  • 0

Varizoom Follow Focus

rebotnix Technologies

Camera Motion Research

Betz Tools for Stabilizers

Paralinx LLC

Boland Communications

PLC Electronics Solutions

PLC - Bartech


GPI Pro Systems


Omnishot Systems

Wireless Video Systems

Ritter Battery