Jump to content



Photo

Steadicam ACC weights


  • Please log in to reply
2 replies to this topic

#1 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1656 posts
  • Los Angeles, CA

Posted 11 July 2013 - 11:57 AM

Is anybody using the Steadicam clip-on weights on a non "steadicam" monitor bracket like the XCS or Sachtler?

 

http://www.tiffen.co...num=800-7965-01


  • 0

#2 Jerry Holway

Jerry Holway

    Advanced Member

  • Sustaining Members
  • 737 posts
  • Philadelphia

Posted 11 July 2013 - 01:10 PM

Jens-

 

The "clip-on" part is designed for .625 diameter rods. They should also work with 15mm (.590), but might need a layer of gaffer tape. .500 diameter rods would need a little plate (.125 thick) or more tape or hard rubber. There are two widths - one for the battery rods, and one for the monitor rods - get the latter.

 

The weights also work alone with a 1/4-20 thread and are stackable.

 

Jerry 


  • 0

#3 Jens Piotrowski SOC

Jens Piotrowski SOC

    Advanced Member

  • Sustaining Members
  • 1656 posts
  • Los Angeles, CA

Posted 11 July 2013 - 03:31 PM

Thx Jerry, good to know.


  • 0




Media Blackout - Custom Cables and AKS

Paralinx LLC

PLC Electronics Solutions

GPI Pro Systems

Boland Communications

Engineered Cinema Solutions

PLC - Bartech

rebotnix Technologies

Omnishot Systems

Varizoom Follow Focus

BOXX

Teradek

Betz Tools for Stabilizers

SkyDreams

Ritter Battery

Wireless Video Systems

IDX