Jump to content



Photo

Do the Merlin settings have to be so precise everytime?


  • Please log in to reply
2 replies to this topic

#1 Michael Barnes

Michael Barnes

    New Member

  • Members
  • Pip
  • 6 posts

Posted 09 July 2013 - 06:28 AM

Everytime I setup my cookbook settings and lay it on table I find the horizontal axis needs very SLIGHT trimming... is this negligible in real world use? I don't really have time to get it precise everytime.


  • 0

#2 Mike Dunn

Mike Dunn

    New Member

  • Members
  • Pip
  • 5 posts
  • Columbus, Ohio, USA

Posted 09 July 2013 - 08:30 AM

In my experience with the Merlin 2, it needs to be trimmed pretty much constantly--particularly after putting it down and picking it back up. I got pretty good at compensating for slightly off trim for those times when retrimming just isn't feasible. You *may* have a better experience if you invest in a Merlin tabletop stand (or a C-stand or Steadistand) so that it can remain in its "flying" configuration when not in use.

 

I never had the advantage of cookbook setting for my camera, so at least you have that going for you.


  • 0

#3 Victor Lazaro

Victor Lazaro

    Advanced Member

  • Sustaining Members
  • 1230 posts
  • Sunnyside Queens, NY

Posted 09 July 2013 - 08:57 AM

If the off balance is an issue dr your shot, trim it, if you are ok with it you don need to. It's a personal feeling. Even large steadicam a readjusting (to a certain degree)
  • 0




Varizoom Follow Focus

Omnishot Systems

Engineered Cinema Solutions

Media Blackout - Custom Cables and AKS

PLC Electronics Solutions

Betz Tools for Stabilizers

GPI Pro Systems

IDX

Paralinx LLC

Teradek

Boland Communications

Wireless Video Systems

SkyDreams

PLC - Bartech

rebotnix Technologies

BOXX

Ritter Battery