Jump to content


Complete Rig 11.000

  • Please log in to reply
4 replies to this topic

#1 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 17 June 2013 - 04:57 AM

My BAERBEL is collecting dust since I am mainly doing DoP now, so it finally has to go

It is located in GERMANY, near Frankfurt
I had it  for sale in this forum this year in february, got a lot of replies , someone wanted to buy it and than never payed the bill.................... So here it is again.

The BFD in the old ad is not part of it anymore.

The rig has been regulary serviced and tuned
It has never let me alone on any shoot and has been used on
Commercials,Dokus,Musicvideos,Movies,......with all kinds of
cameras (From 35, to 16 ,from RED to HD, Beta,even 5d).

Some of those shots are on my homepage at  www.rebel-pictures.de

It has been allways treated nicely, but as it is with a tool beeing
used, it has some scratches too.

The rig is SD, but can be converted into an HD-rig by Baerbel.

I am only selling the rig as a complete package  !

it comes

Baerbel Sled  12/24 titanium post,  3x
long dovetails, 1x short, 15mm rods, 19mm rods, sony-plate,
"micky"dynamic balance,tools,srews (in custom made

Superpost titanium 90cm (has a dent/bump but works

Superpost titanium 115cm, never used ( if You want to
get lower than  ground level or very high. Bought it for a
film with horses, that than  wasn´t filmed)

extension cable for working with superposts.

Some BNC cable,
12V Power cable, 1 xARRI-Power 24V

Baerbel Arm (in peli case)
with a couple of rods, washers, J-Bracket and one
special, extra long  j-bracket-rod (just put it through the
top and attach the j-bracket to  it(see picture).This way
you get much lower than usual. I used it a lot.

I really used that west a lot. It still works, but some maintaining
should be done to it.It never bothered me.
Some new belts/spare parts are with it.I was
just too lazy to renew it.

Transvideo Cinemonitor III (not 3a)
power cable + power cable for topstage
Not the newest but works fine        (in peli case)


9 x Anton Bauer
Trimpack 45WH with PAG Charger/Discharger ARI24PLD and 3
charging-adaptors ( in two cases)
the batteries all work fine, but
2 of them might need a recell


Red Bite Decimator ( SDI to SD, not HDMI!) with mounting-bracket for the  rig (Used
it with RED, Alexa and some other HD Cams .Allways worked


EIWA FATBOY Videotransmitter+Receiver (PAL)

Allways worked good. Have beaten a modulus + titan in a comparative test with it.




Low Mode Cage (In my opinion the best Low-Mode Cage avaiable.Used it
with 435, 235, DVC-Pro,SR3,416,Red......)

-Hardmount for
EURO-Mount. (Used it on some commercials.

-Weight plates between
2,5kg and 10kg (aluminium+iron) with holes for  attaching
catgriller and doveplate and srews to fix them together (as in the
picture). I got  these plates made mainly for training.

They allowed me to get my little  dv-training camera up to
18kg !
But I also used them on a lot on shoots, when the camera
was just to  light.Just attach cat-griller to the top, a
dovetail to the bottom and  you can use it in between your
camera and the rig. (see picture)

-Screws,some tools,velcro,........

- 1 old transvideo cinemonitor I,   
I think it still works, but didn´t use it for a long time

Asking   11.000,- €
Buyer pays shipment and taxes. European buyers will have to pay VAT on it!

(If from the US: Shipment from Europe to the States is around 1000 €)



I will be gone all of July, so if interested and wanting the rig before August let me know quickly.

mail me :  sebastian@rebel-pictures.de  

or give
me a call +49-151-2234-2219


all the best




Attached Files

  • 0

#2 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 20 June 2013 - 03:54 AM

still there

  • 0

#3 Marcio Bodnariuc

Marcio Bodnariuc


  • Sustaining Members
  • 10 posts
  • Toronto, Canada

Posted 16 May 2014 - 06:19 PM

Hi Sebastian,


I am looking to buy a Red Bite Decimator 2.

Is your Decimator 1 or 2?

If Decimator 2, would you sell just the Decimator? 

How Much?


Thanks in advance,


  • 0

#4 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 16 June 2014 - 03:11 AM

Since a couple of people have been asking : yes, the rig is still avaiable and working .

Actually I am doing another shoot with it tomorrow, but if the right one comes to buy it, so it shall be ;-)

  • 0

#5 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 30 June 2014 - 07:31 AM

still there

  • 0

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

Wireless Video Systems

The Moses Pole - Steadicam Monopod

rebotnix Technologies

Omnishot Systems

Paralinx LLC

Varizoom Follow Focus

GPI Pro Systems

Ritter Battery

Boland Communications

PLC Electronics Solutions


Engineered Cinema Solutions

PLC - Bartech