BOXX Cobalt system, ( SD, or component Video Tx and Rx)
Boxx Transmitter ( 5Ghz and 2.8Ghz switchable) with AB mounts both sides. It can be powered from a Batt when sandwiched between the batt and camera? or you can power it via the 4 pin Hirose on the Tx via one of the power cables included which are:
Hirose 4 pin to PRO- Vid/Pwr 4 pin
Hirose 4 pin to Hirose 4 pin ( like on the rear of most Broadcast cameras)
Hirose 4 pin to XLR4Male
Hirose 4 pin to P Tap
3 palet style antennas
The system also transmits audio although I never used this option.
Comes with mini xlr 5 pin to standard XLR5Female ( for the audio out of some broadcast video cams
also mini xlr 5 pin to standard headphone male jack
Boxx receiver 5Ghz and 2.8Ghz switchable with 2 antennas
AC Power supply 100V - 240V input 12 V output
Power cable for AC power supply
Breakout Multi Pin cable loom with component connectors, Audio left and right connectors and 4 pin XLR connector.
( I've never used the Multi Pin loom)
The receiver can be powered via the AC power supply, or the Hirose 4 pin connector on the unit. you can use one of the above Hirose connectors to power the receiver and another or AB brick to power the Transmitter.
I had Nebtek install a male side AB plate to one side of the receiver so you can attach it to the back of a monitor, etc.. but it is only there to mount it, not connected internally, I would guess you can install a receiver plate on the opposite side and have it wired like the transmitter so you could attach it behind a monitor and then add a Batt to it and power both, but that would be up to you.
The receiver is powered thru it's 4 pin Hirose like the Tx unit.
Price $1850 shipped Priority via USPS to anywhere in the continental US.
Outside of the US, Shipping is not included.
Any questions please message me, Thanks
2013-06-05 00.31.19.jpg 67.09KB 223 downloads