Jump to content


Steadicam package ready to fly, HD / SD, 12/24 volt, 3D ready, 10-50 Lbs. cameras!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


  • Please log in to reply
No replies to this topic

#1 Kyle Young

Kyle Young

    New Member

  • Sustaining Members
  • 4 posts
  • Los Angeles, CA USA

Posted 24 April 2013 - 02:45 PM

2013 EFP HD Steadicam package  $22,500
90% all new material.


12/24 volt capable
triple IDX battery mount that can slide back for better balancing
2 post, carbon fiber posts
MarkV 3A/EFP stage like new
New Original EFP gimbal
Articulating one arm monitor mount
7" SD 16X9 LCD monitor with power/video cable
docking ring
docking/balancing bracket for c-stand
1650 Pelican case with plucked foam

Upper j-box:
*3x HD BNC connectors
BIG 3pin Lemo camera power connector with 12 and 24 volts(same as Tiffens so you can purchase their camera power cables if needed quickly)
4pin XLR power connector with 12 and 24 volts (if you like to make your own cables or just want to save $75 and use a common XLR connector instead of the expensive LEMO)
2x 2pin Lemo 12v power connector for accessories
2x 4pin Hirose 12v power and video in one connector for accessories

Lower j-box:
*3x HD BNC connectors(non-stop run from the 3x HD BNC connectors on the Upper J-box)
Video distribution amp inside lower j-box(splits Standard def NTSC signals keeping them at full strength)
15 AMP breaker for ON/OFF
12/24 volt switch( choose between keeping all 3 batteries at 12Volt for extended run time, or select 12/24v to run 24 volt film cameras as well as your 12v accessories)
4x BNC OUT connectors
1x BNC IN connector
2x 2pin Lemo 12v power connector for accessories
2x 3pin Lemo 12v power connector for accessories
2x 4pin Hirose 12v power and video in one connector for accessories
2x 6pin Hirose 12v power and video in one connector for accessories

Luna arm
15-70 lbs. total weight capability
arm bag
1 year warranty from Luna

lightweight iVest(similar to a combination of a 3A vest and a Master Series vest)
steel socket block
all black
cam lever buckles

1650 pelican case to carry arm, vest and accessories
big Allen t-handles wrenches for arm
2 Allen wrench sets
combo screwdriver
camera mounting screws
compact 2-piece travel c-stand that fits in case
25 lbs. sandbag

Package price is $22,500
*can upgrade to custom cut foam for $250 additional

All that is needed is camera power cables and IDX batteries to start operating.

I have a used battery package for sale.  3 stackable IDX E-10 batteries and a dual charger for $1000.

All sales are cash only.  Everything above is in stock and ready to go except the arm which I do not stock.  Once I receive payment I purchase or order a Luna arm that is typically in stock.  If the arm is not in stock it usually is only 1-3 weeks out.

Please call me anytime, 818-795-4433.

Located 1 hour from Burbank, CA USA


Email me for more photos of entire package, not enough space to post here.


Kyle Young




Attached Files

  • Attached File  A6.jpg   80.03KB   330 downloads
  • Attached File  A7.jpg   111.65KB   343 downloads

  • 0


GPI Pro Systems

PLC - Bartech

Ritter Battery

Media Blackout - Custom Cables and AKS

Betz Tools for Stabilizers

Engineered Cinema Solutions

PLC Electronics Solutions

Omnishot Systems

rebotnix Technologies

Wireless Video Systems

Paralinx LLC

The Moses Pole - Steadicam Monopod

Varizoom Follow Focus

Boland Communications