Jump to content



Photo

Anton Bauer Accessory Mount Plates


  • Please log in to reply
7 replies to this topic

#1 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 384 posts
  • Philadelphia, PA

Posted 23 April 2013 - 10:37 PM

So here's a little gadget that I wanted one of for me, and somehow ended up with around 20 of. (Long story - something about a laser cutter and a friend who owed me a favor)

 

It's a super light little 1/8" delrin plate with the appropriate screws and washers on it to snap onto any Anton Bauer battery mount. It also has on it 9 1/4"x20 tapped holes, both in 9mm Red spacing, as well as 1" center to center spacing. All in all, it's a perfect way to hold lightweight accessories on your rig without the hassle and possible vibration of Velcro. I personally use it to clip my Decimator to the back of my monitor, but it'd be great for a recorder, transmitter, or any number of other cool little gadgets.

 

$45 plus shipping.

 

Email me if you're interested. willsvideo@gmail.com

 

 

Just a little note, in the pictures, some of the holes are countersunk. All of the plates, however, are tapped on all 9 holes.

Attached Files


  • 2

#2 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 384 posts
  • Philadelphia, PA

Posted 25 April 2013 - 12:43 AM

Only 3 left. Jeez these went fast!
  • 0

#3 daniel hanit

daniel hanit

    Advanced Member

  • Sustaining Members
  • 74 posts
  • Israel

Posted 25 April 2013 - 07:31 AM

I'll take 'em..
Please e mail me at danielhanit@gmail.com
  • 0

#4 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 384 posts
  • Philadelphia, PA

Posted 25 April 2013 - 10:22 AM

I'll shoot you an email Daniel.

All the rest have been claimed. Thanks!
  • 0

#5 JobScholtze

JobScholtze

    Advanced Member

  • Sustaining Members
  • 1361 posts
  • Netherlands

Posted 25 April 2013 - 12:14 PM

dang, to late


  • 0

#6 Richard W. Davis

Richard W. Davis

    Advanced Member

  • Sustaining Members
  • 232 posts
  • Los Angeles

Posted 25 April 2013 - 02:01 PM

Time for another run...

 

Rich Davis

LA


  • 0

#7 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 384 posts
  • Philadelphia, PA

Posted 08 May 2013 - 06:48 PM

I'm working to see if there are any ways to make the assembly of these less labor-intensive. If I can figure something out, I'll be doing another run. Watch this space!


  • 0

#8 Tom Wills

Tom Wills

    Advanced Member

  • Sustaining Members
  • 384 posts
  • Philadelphia, PA

Posted 08 June 2013 - 05:24 PM

I've made another batch of these plates, since people have been so interested they've been handing me cash to take the ones out of my accessories kit!

 

They now have genuine Anton Bauer studs on them, and they look and work even better than the first batch. Still hand-assembled in my basement workshop, and still dirt cheap at $50 each (a little more expensive to cover the Anton Bauer parts now).

 

Here's a picture of my first prototype of the new batch.

 

Email me if you want one (or two!). willsvideo@gmail.com

 

By the way, if you owned one of the original plates and want the new gold mount studs, let me know, and I'll mail you off an envelope of them.

 

 

Attached Files


  • 0




GPI Pro Systems

SkyDreams

Wireless Video Systems

Varizoom Follow Focus

IDX

rebotnix Technologies

Omnishot Systems

Boland Communications

Ritter Battery

Paralinx LLC

Engineered Cinema Solutions

BOXX

Betz Tools for Stabilizers

PLC - Bartech

Teradek

PLC Electronics Solutions

Media Blackout - Custom Cables and AKS