Jump to content


complete baerbel rig

  • Please log in to reply
3 replies to this topic

#1 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 19 February 2013 - 10:55 AM


My BAERBEL is collecting dust since I am mainly doing DoP now, so it finally has to go

It is located in GERMANY, near Frankfurt
I had it  for sale in this forum last year, got a lot of replies , but just could not let
go of it.....

The rig has been regulary serviced and tuned
It has never let me alone on any shoot and has been used on
Commercials,Dokus,Musicvideos,Movies,......with all kinds of
(From 35, to 16 ,from RED to HD, Beta,even 5d).
Some of those shots are on my homepage at  www.rebel-pictures.de

It has been allways treated nicely, but as it is with a tool beeing
used, it has some scratches too.

The rig is SD, but can be converted into an HD-rig by Baerbel.

I am only selling the rig as a complete package  !

it comes

Baerbel Sled  12/24 titanium post,  3x
long dovetails, 1x short, 15mm rods, 19mm rods, sony-plate,
"micky"dynamic balance,tools,srews (in custom made

Superpost titanium 90cm (has a dent/bump but works

Superpost titanium 115cm, never used ( if You want to
get lower than  ground level or very high. Bought it for a
film with horses, that than  wasn´t filmed)

extension cable for working with superposts.

Some BNC cable,
12V Power cable, 1 xARRI-Power 24V

Baerbel Arm (in peli case)
with a couple of rods, washers, J-Bracket and one
special, extra long  j-bracket-rod (just put it through the
top and attach the j-bracket to  it(see picture).This way
you get much lower than usual. I used it a lot.

I really used that west a lot. It still works, but some maintaining
should be done to it.It never bothered me.
Some new belts/spare parts are with it.I was
just too lazy to renew it.

Transvideo Cinemonitor III (not 3a)
power cable + power cable for topstage
Not the newest but works fine        (in peli case)


9 x Anton Bauer
Trimpack 45WH with PAG Charger/Discharger ARI24PLD and 3
charging-adaptors ( in two cases)
the batteries all work fine, but
2 of them might need a recell

Wireless Focus BFD

BFD, one channel, transmitter+ receiver  (the
receivers antenna lost its  plastic-surrounding on a shoot,
but it still works 100percent. who has a  problem with its
look should  order a new  one. can´t be that

Heden vertical motor M28VP , gears 0.8 ,0.4, 0.5,

1x power-cable, 1 motor cable regular, one motor cable
extra long, run-cable arri, adapter run cable sr2/sr3, power 12v/5

mounting brackets

Custom made focus rings to slide
on the focus wheel.
I was not pleased with the little plastic
strips that come with the BFD, so I just had Baerbel to make
something else for me.

The receiver has got two inlays for
special screws to be attached to the mounting bracket on the


RedBite Decimator ( SDI to SD, not HDMI!) with mounting-bracket for the  rig (Used
it with RED, Alexa and some other HD Cams .Allways worked


EIWA FATBOY Videotransmitter+Receiver (PAL)

Allways worked good. Have beaten a modulus + titan in a comparative test with it.




Low Mode Cage (In my opinion the best Low-Mode Cage avaiable.Used it
with 435, 235, DVC-Pro, HD,SR3,Red......)

-Hardmount for
EURO-Mount. (Used it on some commercials.

- Lowboy

- Super-Heavy Manfrotto Weight-Bag (
filled with steel! weighs around 15 kg)

-Weight plates between
2,5kg and 10kg (aluminium+iron) with holes for  attaching
catgriller and doveplate and srews to fix them together (as in the
picture). I got  these plates made mainly for training.

They allowed me to get my little  dv-training camera up to
18kg !
But I also used them on a lot on shoots, when the camera
was just to  light.Just attach cat-griller to the top, a
dovetail to the bottom and  you can use it in between your
camera and the rig. (see picture)


- an old transvideo cinemonitor I,   
I think it still works, but didn´t use it for a long

Asking   15.000,- €
Buyer pays shipment and taxes. European buyers will have to pay VAT on it!


mail me :  sebastian@rebel-pictures.de  

or give
me a call +49-151-2234-2219


all the best



Attached Files

  • 1

#2 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 06 March 2013 - 04:58 AM

My Baerbel still for sale ! new price 14.000 € + vat + shipping

  • 0

#3 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 27 March 2013 - 03:51 AM


Had some offers but  the right person was not amongtst them.

New price : 13.500 €+vat+shipping

  • 0

#4 sebastian matthias

sebastian matthias

    New Member

  • Sustaining Members
  • 1 posts
  • germany

Posted 09 April 2013 - 04:57 AM

NOW 12.500 €




  • 0


Boland Communications

Media Blackout - Custom Cables and AKS

Varizoom Follow Focus

rebotnix Technologies

Omnishot Systems

GPI Pro Systems

The Moses Pole - Steadicam Monopod

Paralinx LLC

Wireless Video Systems

Betz Tools for Stabilizers

PLC - Bartech

PLC Electronics Solutions

Ritter Battery

Engineered Cinema Solutions